I would like to know how to repair cracks on a concrete front porch. I had a home improvement person repair it with an epoxy paint combination, an...
COMMUNITY FORUM: MISCELLANEOUS
I have a 92 Ranger and it is really hard coming out of 4th gear. Is my transmission going or do they have fluid that I should check? Any help wou...
How important is it to seal newly poured concrete and also exsiting concrete? My driveway was poured two years ago and sealed (skimpy). I had to ...
I want to apply a fieldstone treatment over existing stucco/brickface. (Stucco treated/cut & colored to appear as brick). My question is: can I...
I own a 4 story brownstone in New York City and suffered a severe water leak from a pipe in the hall on the top floor. I've removed all wet capeti...
I have a very old iron bed, painted white by a professional. However, I'd like to find a decrative footing for the iron bed that will protect my c...
"***** Craftsman 1/2 HP GDO Stopped Working" Door suddenly quit working. When depressing a remote or wall control,I can hear the relay clic...
Does anyone know where I can get parts of an Ironbridge at Coalbrookdale 1980 CBD woodburning stove. I am looking for the feet(or maybe they are ca...
Greetings all. Just have a question about slab repair. I have part of a slab that is outside my garage that has sunken and cracked- the section mea...
I have a living room fireplace with a brick hearth that was painted white. A few years ago I had a leak in the roof close to where the chimney is....
hi, my name is greg and I work as a lifeguard. The pool is a tub 20ft. by 40ft. set in a floor. There is a pump room underneath the tub. Between th...
Does anybody know what has to be between the copper countertop and the wood it's mounted to in order to prevent condensation (ie: hot pots directly...
I'm still waiting for someone to suggest a source for the product "Chairlok." Does anyone know where I can find it ? Thanks !
Several years ago we took up some old carpenting in our one room and then found tiles under them. Some of them were already broken from the tack st...
I have a 10 by 20 metal building which is bolted down to the concrete slab by the metal frame. When it rains, water enters at the front left and r...
I am working on a bathroom, removing wallpaper, patching up then painting. While removing wallpaper, I found some mold spots. What is the best meth...
Whats the best way to find one? I tried a site http://www.contractoropinion.com and it worked well
I have my heart set on wood countertops and was wondering if laminate wood flooring could be used instead?
I have a United Farm Tools, Paulk Div. 3 point hitch finish mower with a 60" cut. Model # 1505. I need blades. Can anybody send me in the right dir...