Is it possible to tap into a 4 " cleanout for a sink. Is there a 4" pvc connection to use as cleanout and 2" sink drain pipe?
COMMUNITY FORUM: PLUMBING
I've tried using a soap disovler, a snake, and a garden hose pressure bulb, but with no luck. So far with the snake, the coil doesnt appear to hav...
Okay, I got a call from my sister-in-law that the kitchen sink was backing up and wouldn't drain in her mobile home. So I took out the trap and tr...
doing some work on shower how come bathroom sinks have their own separate values to shut off the water ? and shower/bathtubs are " hotwired" dire...
I have a Sears hot and cold water supply in a bath and shower. The hot water has almost stopped. I've changed the valve body and still there is n...
I recently replaced my kitchen faucet, including the metal flex line from hot water supply. All was initially fine, but the hot water flow steadily...
I just had pipes(water pipes) in my crawl space replaced with PEX. What is the best way to insulate PEX pipes? Can heat tape be used on pex? If so,...
My friend just bought a house. He went to use the shower tonight and the water only ran for about a minute. When he went to get in the shower, it h...
I have air in my basement shower hotwater line, my water is supplied by the city, it is only in the shower were the air makes the pipes vibrate. Is...
Came home this afternoon and discovered black water in one toilet (of two). Other one looked clear. Had to go out, came home 4 hours later & seco...
I am remodeling a bathroom in a 40+ year old addition. The current toilet is a wall mounted toilet. I am considering replacing it with a new wall...
I have a new shower faucet set and am installing the shower arm (the pipe the shower head threads to) into the female 90 degree elbow in the wall. ...
I have loud banging in pipes across the condo when the kitchen faucet and one bathroom faucet is turned on. My question is, are the faucets worn o...
Same problem, two baths. One shower, one bathtub. Before a relatively short shower, the water runs cold. Before the tub is half full, same probl...
I am building a new cape style home, and have seen many good looking and affordable Danze faucets available on the web. Does anyone out there have...
Hey Sylvan, Im back with another question. I followed all prevoius instructions regarding undersink connections,chrome plated brass 1-1/4 to 1-1/4x...