Ultraflo push button plumbing parts
We've had our Ultraflo push button plumbing since 1997 and are looking for parts. Does anyone know where we can find parts or information about Ul...
We've had our Ultraflo push button plumbing since 1997 and are looking for parts. Does anyone know where we can find parts or information about Ul...
4
answers783
Viewsthis seems to be a common problem, but i haven't been able to find a solution... after flushing the toilet, a slow dripping noise can be heard f...
4
answers1628
ViewsHi all, I cannot find the make or model any where in this faucet. It was unwanted by a friend but they don't know where it is from. I've been to...
2
answers266
ViewsHi all, We're purchasing our first home and there is a pit for an old flood control system in the basement floor. I'm pretty sure it is not fun...
2
answers448
ViewsI have a small problem with my fluidmaster 400a. Once the toilet is flushed, the water does not refill the toilet via the refill tube. After fl...
4
answers960
ViewsHi Would like to install a new shower stall in my basement.Cannot put the drain directly over the sewer...
2
answers771
ViewsOur house, built in 1978, was equipped with an UltraFlo solid-state plumbing control/push button energy-conserving water system. This is an all-el...
20
answers1681
ViewsHi; I currently rent an old water softener and would like to buy a new one. I bought a do-it-yourself kit to test the water hardness before I make ...
1
answers1133
ViewsThe water pressure to my house (all faucets and outside bibs are the same) is fluctuating. When I turn on a faucet, the water starts off fine, dro...
1
answers1760
ViewsI am about to finalize my house offer "foreclosure" and found that the sump pit has about 12 inches of water. I checked my neighbors sump pits- n...
2
answers587
ViewsThe roof is the important part of the house. It should be constructed with best material and hire a roofer for it's construction. What techniques y...
1
answers1245
ViewsHi, Can I get some help identifying this faucet? The make and model number would be most appreciated. I have a included a video. http://www.you...
3
answers30038
ViewsI'm preparing to install convert a bathroom tub into a fiberglass shower stall - I want good, efficient and easy to clean. Kohler, Sterling, Maax,...
0
answers1355
ViewsI don't think it is true, but smoeone told me if you don't use one of the toilets in your house, it is unsafe-may emit gasses. Is this true?
4
answers827
ViewsI purchased the plumbers secret some years ago. Where can I purchase the air cans?
8
answers1352
ViewsI discovered water today seeping *up* from my kitchenfloor, which is hardwood. It is coming in slowly, right where my kitchen island meets the flo...
1
answers811
ViewsP & T valve on boiler was leaking (approx 1 gal/day). Valve replaced twice (in case first was faulty) STILL leaks, but now only 1/4 gal/day. Same ...
6
answers1010
ViewsI hear a drip in my toilet. I do not see any evidence of a leak around or under the toilet. I went to the unfinished basement and do not see anyt...
2
answers602
ViewsSo just moved into a TH a few months ago, this is the first time I need to winterize my home. See attached picture of what my hose bib lines look ...
5
answers917
ViewsMy bathroom sink is draining slow.When it backs up their are air bubbles coming up.Any help would be appreciated.
13
answers1847
Views