is there anything you can put on vinyl siding to retard mildew growth? I just washed my siding and would like to do this as infrequently as possible.
COMMUNITY FORUM: ROOFING & SIDING
I have a 1959 house which has no plywood over existing wood so i can see tar paper in some spots do i need to add plywood before getting new shingl...
I started a project 2 years ago and Bird does not make Vinyl siding anymore. I am looking for their Clay color to finish the job.Any ideas would be...
If a hole was found in engineered wood siding can the one board be replaced, or do you have to replace a whole section or side of the house to repa...
I had some vinyl siding put on last summer. This year i noticed it looked a bit wavy. They contractor came back, told me a few pieces were nailed t...
I am beyond retirement age and now remodeling to get my wife's "Dream Home". We removed the old roof entirely and put 2x12 trusses on a 12/12 pitch...
I live in the northeast and I am adding on to a turn of the century victorian. My builder used particle board siding when the plans called for Plyw...
I am presently renovating a small 3 bedroom bungalo in Gainesville, Georgia. It has wood siding, which overall is in good question. My question is ...
I have read a few different opinions online about whether or not this is a good idea. I am leaning towards going over it because I have T1-11, then...
I was wondering if it is possible to build a second story onto a 2005 double wide that is on a foundation?
I just purchased this house with neglected cedar siding. There is not much stain left, so you almost see bare wood. There are some areas with milde...
i plan on replacing some damaged siding on my home i just need to replace the first 4 pices up from the bottom i am planning on using concrete type...
We bought a house to flip; there was a small area on the west side of the house where the siding was soggy and rotted. There's a sprinkler that sp...
Hi, my name is Louis. I am from South Africa. I have a steel Construction company, but need help with the load bearing of a wood beam 228mmx50mm or...
Is it possible to join existing 4" steel eaves trough to new 4" vinyl ? It appears to fit with a little coaxing but I am concerned about expansion ...
Our roof was recently destroyed in a hail storm. It was suggested that we replace the 2 turbine vents with ridge vents for increased energy effici...