door jams/frames
i need to replace my existing door and frame.i have a 30" 80" door and frame i need install. Could anyone send me down the right road.
i need to replace my existing door and frame.i have a 30" 80" door and frame i need install. Could anyone send me down the right road.
0
answersThe wooden kitchen door jamb hole where the strike plate mounts has gotten really dug out and messed up, I used some long screws to remount the strike plate and i...
2
answersIs there any simple test to perform if Low E was put on proper side of panes and if Argon is still intact? We are having problems with cleaning our new windows. ...
5
answersWe live in a nice neighborhood, renting from a man who uses his homes as cash cows. No interest in upkeep from him, and the exterior double doors of the home are...
2
answersMy house got egged. The staco and window were hit. How do I remove it?
1
answersI live in a 30-year-old house, that has a full basement. The previous owner had an exterior entry door cut into foundation to provide access to his shop.To keep w...
0
answersHoping that maybe someone can help me out. I plan on installing new french doors and my rough opening is 11'6 1/2". My plan is to install two seperate units, a 6'...
4
answersMy question is:I am having a new traditional colonial style house built and the builder installed your windows. We are trying to fiquere out how to put window sil...
0
answersHello, I would like to hear some opions on American craftsman window 2160 single hung. Is it a pretty good window,ect? I am thinking about buying all of them at H...
3
answersWould someone please tell me how to go about makeing a vinyl window plum and square.What steps do i take.I tried to do it to no avail and how do i measure it to m...
3
answersI have a 1920's home with an old door between the kitchen and dining room that swings both ways. Does any one know how to take a swinging door off of the frame? I...
2
answersHi thanks for reading this. I have a 5' x 5' window with a circular shatter crack pattern. I'm seeking a way to make it safe until replacement time. It's relative...
1
answersI like Norco windows because of the 7/8" grill width and the profile of the grill. Is this a laim criteria for picking a window? Is there another brand with wid...
8
answersIs there any way I can check the U factor on these windows and doorwall?? I think they have shipped me southern windows, these windows are not made for Michigan.H...
3
answersI'm replacing interior hollow core slab doors with hollow core 6 panel doors and have to trim about 3/8 off the width. Is it preferrable to take the wood off the...
1
answersI have a bay window that has two of the 6 sections that looked fogged. The windows are double paned Croft windows 10 years old. Is this normal for this brand wi...
1
answersWe had Cardinal vinyl windows installed in Sept. 2002. The problem in condensation. The condensation occurs on the screen frame and on the outside where the win...
2
answersPlease help! I have a Premdor Entergy door in my house (that leads to my garage) that is stuck. I can open it by pushing it, but not by pulling it. Any advice?
1
answersI am about to replace my steel windows with vinyl windows and am considering replacing them with American Jewel windows. The NFRC rating is quite good and the war...
0
answersI just put in several Home depot 8500 double hung replacement windows.I had trouble trying to get them level and plum.I admit I don't know what I am doing .Seems ...
1
answers