Hi, We are considering Window City for our 6 windows and two doors of our new home in Ontario. As a part, we have done a lot of research and rea...
COMMUNITY FORUM: WINDOWS & DOORS
Bob, we have an adult special needs daughter and I am needing some plans so that I can build a entrance ramp for her. Ref:48" to 60" wide,3" rise, ...
Hello - we are building a new home and the builder is suggesting Viwinco vinyl windows, and specifically Viwinco's Oceanview Impact Resistant line ...
Can anyone tell me anything good, bad, or indifferent about Milgard windows? I am considering them for a window replacement project in my home. I...
Hi having cracking popping up in walls and by window in house. Can anyone tell me why this is happening? Thanks!
Do you have to REMOVE the door to get the weatherstripping on the bottom of the door? The doors are SO CLOSE to the floor, I don't see how I would...
Should you case the window before the walls are finished or finish the walls first then case the window. The walls will be rounded pine board.
I am building a house and I am looking at door hardware. I have chosen a lever that apparently has a left and right dummy lever but the style I ha...
I have a double car garage but one of the garage doors won't work with the remote, on top of that the outside keypad won't work for that door eithe...
Vetter windows were put into a building renovation consisting of 13 condos. They have been a problem since then, 1998. I have 20 of them, they ar...
I have a sunroom where 2 of my walls have internal tilt & lift blinds built-in and now while letting one of them down it is seemingly stuck on one ...
My sister just bought a house with older Anderson crank out windows. All windows are inoperable because of broken crank drives. The crank screw co...
They a builder grade window / which means cheap / so combine that with poor installation?? HELLO
I am looking for a solution for a large closet opening: the closet is 28" deep and 8-10' wide. What would be the best solution for closet doors t...
I have an exterior door that was installed before I moved in. the way it was installed has the pins for the hinges facing outside so someone could ...
I have been researching a replacement window project for my home along the front range in CO. I live at an elevation of 6726'. We get extreme wea...
I need some advise in an area I know very little about..window replacement. I live in Houston, Texas. Our house is 19 years old, has aluminum windo...
I just bought a new metal door from Home Depot. I requested it to have the two holes for the door knok and dead bolt. It is a slab house and the ...
I have been trying for over a year to get my fogged up windows replaced. Would not recommend sulverline to anyone. They come with a lifetime guaran...