slammed door
I slammed a door that opens in. The wall past the frame is now pushed in. How can this be fixed?
I slammed a door that opens in. The wall past the frame is now pushed in. How can this be fixed?
0
answersWe are rebuilding our kitchen cabinets and installing new windows. For exterior reasons need to have two 36'' x 48'' dbl hung windows behind sink cabinet. We are ...
0
answersI live in NW Colorado, where the temps have dropped to more than 10 below!! I recently had some 30 yr old windows replaced. I know the contractor insulated the...
0
answersI have severe water leaks on my WeatherShield/ProShield casement windows used in my home that was built in 2001. During the first year the builder "repaired" the...
1
answersI have all Great Lakes Windows in my home - installed about 5 years ago. I live in Minnesota and during the winter months, they sweat and sometimes even have ice...
2
answersI am trying to replace some existing bracing on a bay window - are there are bracing techniques available that not too obvious but still do the job. Its an old w...
0
answers1. I had weatherstripping put on my doors and am finding out that the doors have to be slammed hard in order for the locks to catch. Is this normal? If not, h...
1
answersWhere is the best place to locate garage door openers for my old garage door opener? Stanley Premier; 1/2 hp Serial 085055 Model 9200.17 A WDGusler
1
answersI have an Andersen sliding Patio door. Recently noticed that the flexible weatherstiipping gasket that is on the side where door slides in and out is cracked. How...
0
answersWhat is the best material to use as an exterior windowsill? I have heard Douglas Fir and Redwood are good. Someone told me that using a good quality stud is fin...
0
answersHello! I just acquired a privacy door circa 1870; the glass panes though have long since been replaced by plywood panels. I wanted to know if anyone has dealt w...
0
answersWhere can I purchase new magnetic insulation for a metal door?
4
answersHi, we live in NY and have signed a contract to have all new Alside Excalibur windows installed. I thought the work was going to be done mid December, which isnt ...
2
answersHello - i've just purchased a new home and took down all of the shutters to paint. When I removed the shutters, many of the screws stripped. A few of them even ...
0
answersHi Folks, I have two questions about my aluminum metal windows. Maybe someone can share their thoughts. After the first frost and throughtout the winter the in...
0
answersOk..I have a small house in Central Indiana, brick on the front, alum siding on back, and about 1200 square feet max. It was built in 1986 and has wood, double hu...
1
answersActually, it's the larger glass insert that appears to go on the outside track, and a smaller one in the middle track...
0
answersDoes anyone know of websites where I might find masonite interior doors; I can't find anything with search engines. I have seen a few at Home Depot but not enough...
1
answersI am looking to buy a house that has 115 year old windows..in an effort to make them more efficients and to mitigate the lead issue I will be looking to replace t...
1
answersGreetings, my first post here! My home is new construction (2002) in Southern California and has drywall around the inside of the window frame. I believe ther...
0
answers