Old Masking Tape on Aluminum Windows
I am working on a house that was painted 2 - 3 years ago. They put regular masking tape on the aluminum windows (outside) before painting, but never removed the ...
I am working on a house that was painted 2 - 3 years ago. They put regular masking tape on the aluminum windows (outside) before painting, but never removed the ...
2
answersThe big box store I ordered my double storm doors from now tells me I need an extension kit so they will properly fit over my existing front double doors-that, or...
0
answersUnfortunately, I've got a metal door frame that's set into a CMU (block) wall that is out of square. With the metal door installed on 4-1/2 x 4-1/2 hinges, it's t...
0
answersI have a older front door that has weatherstrip which is nailed in place. I have tried to find this weatherstrip at the chain home improvement centers here in to...
0
answersWe have a window in the tub/shower area that has a wood trim around the frame and windowseals. The window looks outside the house. It is impossible to keep the wo...
0
answersI have a cape cod built in 1954. My original, single-paned picture window fogs up occasionally when it rains outside. What can I do to prevent it? Thanks for y...
1
answersI hope that there is someone out there that can help me find what i am looking for. 2'x4' skylight with remote controls, rain sensor, automatic tinting that ru...
1
answersIs there a real differance between the two, is the extra cost if any worth it?
1
answersMy front door is of the double opening variety. Similar to French Doors but both open. My question is how do I weather strip the area in the center where the ...
0
answersI cannot find any information about the benefits of steel vs fiberglass entry doors. From what I have learned, both provide very good insulation (R5-8). Steel d...
0
answersWe recently replaced all of our windows with Certainteed vinyl double pane. The top pane of the kitchen garden window continues to develop a long crack. Certain...
0
answersI am planning to replace several windows in my home. I am considering Andersen (Model 600) and Pella windows. Does anyone have an opinion regarding which might ...
0
answersI previously posted a question about Hanson's replacement windows, but did not learn a lot. I am also considering Andersen or Wallside. Anybody have anything go...
0
answersMy husband and I want to replace all our old windows with replacement windows. We have asked several companies to come to our home for an estimate. Hanson's came ...
2
answersI found the above a very frustrating experience last week - to the point of ripping off all the Hardie trim this winter and putting wood back on. Hardie is very h...
1
answersI just purchased a custom front door with glass insert and the pre-drilled holes for the handle and lock seem very low (32 and 34". Currently my front door handle...
1
answersI just purchased a custom front door with glass insert and the pre-drilled holes for the handle and lock seem very low (32 and 34". Currently my front door handle...
0
answersHi there, I have a client who saw Bob V. on GMA on 9/23, and he is interested in a window and/or window manufacturer called "PTT". I cannot find any information ...
0
answersMy question pertains to the installation of exterior solid wood, pre-hung French Doors and possible alterations. I purchsed two sets of Simpson # 7010 24" (eac...
0
answersI have triple pane pvc windows. Some of them are starting to get moisture inbetween the panes. How do I fix this?
1
answers