Hi All,I am getting ready to fertilize my lawn. I am looking for a fertilizer that is safe to use around children and dogs. All suggestions are a...
I have just removed some carpeting that was covering some industrial tiles and discovered that the carpet installers had used some glue on the indu...
I was replacing outlets in my dining room. THe original outlets are 15A. The breaker is 20A and the wire is 12 gauge. My question is do I need t...
I was wondering if anyone knows of an AC unit that can circulate pool water through the coils to be able to heat the pool and cool the house at the...
I've recently completed a bedroom addition, but have not run extensions from the existing ductwork for A/C. I could run a new air return and addit...
I have installed a forced air LP furnace and central air unit in my summer home in Wisconsin. The heat ducts are 8"x14". The experts recommend that...
The sliding glass door in our family had a bad seal and allowed water to rot the sub-floor. I plan to replace the effected area with new flooring....
I do research on conservation products and I have found two shower cost calculators. These are helpfull for families. One is at Southern California...
Hi All,I am getting ready to fertilize my lawn. I would appreciate any suggestions are a good one to use. Particularly I am looking for one that i...
I have wired a bathroom fan into an exisiting bathroom with two 3-way switches controlling the light above the vanity. One of the existing 3-way s...
We are about to get our roof reshingled but are somewhat confused about the procedure. We have a bungalow, with a rather regular roofline....not to...
Has anyone found a tried-and-true method of spot refinishing stained-laquered pine and oak casing, mouldings, etc? I want to do some minor repairs...
I just bought this house and the first snow melt that saturated the ground around house seems to have caused a rank odor in the basement that was n...
Can anyone tell me if linoleum can be painted, and if so how effctive is it?Mine has yellowed all over.
I am trying to cope an inside corner of crown molding and not being very successful. Could someone tell me the proper angles to cut the coped boar...
When installing crown molding, what determines which edge is the top? Also, can it be coped, or only cut with compound angles?
Best way to seal Water Main Through Poured foundationWell, 54 inches deep and I found the problem with my basement. The caulk seal around my water...
I bought a big neglected old house built in 1880. It has two sets of pockets doors. Of the four doors only one is still on the track. Can I repai...