Hello,I'm a first time homeowner with a 105 year old colonial...the kitchen floor is presently a vinyl sheet in bad shape over plywood. I know ther...
we are considering flipping the floor plan on a house we purchased. it is a saltbox..contemporary. 3 bedrooms and 2 baths downstairs (first floor)...
I have wood paneling on one wall in the living room which I would like change to match the other walls which are drywalled. Would it be possible to...
I HAVE AN OLD BURNHAM BOILER, WHICH IS PRODUCING AN ORANGE FLAME THIS YEAR. I AM ABOUT TO REPLACE THE PRESSURE REGULATOR, BUT DO I NEED TO ADJUST ...
our new house was very abused, the doors inside had been ripped right out of the jams. I am wondering how to replace doors to the broken up and dam...
My victorian home in New Brunswick,Eastern Canada has one side where the wood 1X6" clap boarding was replaced years ago by a type of wide masonite ...
I live in the Pacific Northwest, our house faces east towards the Columbia Gorge. We get lots of wind and lots of driving rain. We have a leak on...
I want to build a custom home entertainment center. And I want it to be "flexible"...? Stylistically, I want it to have an "oriental flavor". Black...
I am triing to find a company that I heard about, that uses cables within the slab, to correct slab movement/damage. If anybody can help, please do...
I want to clean my kitchen cabinets of the years of grime without stripping and re-staining. Is there any product that will help me do this. I do...
I have a very long blank wall in my living room. This would be the right spot for a wall to wall, floor to celing entertainment center, or base cab...
I have a single lever kitchen faucet which has a shattering noise when used. This happens with either hot or cold water. The internals have been ...
Is it possible to paint black lacquer? If so what types of paint should I use?
Is there any hope for renovating black lacquer? Is this surface "paintable"?
Planning to replace iron railing with oak railing on inside stairway. Any tips would be appreciated.
I am looking for plans to build a sturdy workbench approx. 6 ft.wide. Any help would be appreciated.
I am considering changing from oil baseboard heat to nat gas forced air heat/ac. I am looking for info on "High Velocity" systems. As I understand ...
I damaged the colored sanded grout in my shower floor while trying to clean it with a lime deposit remover. The damaged area has an extremely hard...
My briggs toilet tank totally cracked. Flooded my bathroom, etc. Want to replace with a newer model, have been advised by a plumber and home "exp...