looking for information on national home prefab houses built in the 50's. Looking to find out if a interior wall is weight bearing or not.
We are planning to finish our basement and the work has begun. The walls were already up when we moved in. While removing drywall in one spot for t...
I am looking an attic ladder that has a rough opening at least 30" wide. I would prefer Al instaed of wood. We have 8' ceilings. I have only fou...
I need to clean some tarnished brass switch plates and then to protect them so that don't oxidize. I recall seeing Bob having refered to a method o...
I am looking for a manufacturer of custom False doors. I have a room, that I want to install a false door into a stand 32" frame.Any suggestions?
remove old caulking from sink area,around tub and bathroom sink.application tips for new caulk?
I need to be able to easily move my Craftsman workbench due to limited storage/work area. I don't want to increase the height of the work surface ...
I am building a sunroom addition, which willhave a poured concrete foundation, which will be attached to an old house with a fieldstone foundation ...
We have a yellow/brown brick fireplace that is hiddeous. The walls have been painted white and blue carpet installed. Now we need ideas on what t...
The dishwasher in our house just went out, and in buying a new one we learned that we don't have an airgap, and that code requires us to have one. ...
I love the look and security of some of the new steel doors which also use stained glass inserts. My contractor though says that steel warps as muc...
Our house is approx. a 1200 sq ' bungalow. There are four support beamsapprox 10 feet apart. The two that I wish to remove are next to each othero...
I am looking for plans or patterns for making shutters for exterior windows. I used every search engine available but could not come up with any hi...
We just purchased a new home in the early fall. Over the last couple of months since the weather has gotten cold the upstairs ceiling is seperatin...
Due to limited space, I built a computer monitor desk that is attached to the walls on 2 sides. On these sides it rests on a 2x2 that is bolted in...
want to fix a hole in plastered wall about the size of a basketball. What materials do i need? Any help would be appreciated. Thank You
I recently had a bunch of snow blow in via my certainteed Air Vent ridge vent. It did some damage. Are the shingle over types better. Does anyone h...