Are there any disadvantages to sheathing a new house in 1/2" plywood vs 1/2" Celotex? Opinions on which is better are appreciated.
We have installed and treated the treads with "sand & seal", now wishing to put a finish on them to match closer to the mannington engineered wood ...
I've heard of headless screws that can be used through carpet to stop floors from squeaking but can't find them. Does anyone know were they can be ...
I have the privilege of painting a wall that is now painted wallpaper. The seams are separating, and I prefer to remove the existing top latex pain...
How do I set a wood post in concrete. What tools do I need. How do I estimate how much concrete I need to mix? For example: I want to set an 8 foot...
I just installed a 16X32" pre-made glass block panel into an existing frame in my basement. I had to build out the frame with 1x4s and the glass bl...
I am finishing off my walk up attic and looking for heating options. Would a heat pump make sense for the New England climate?
We're in the process of making a window bigger on one side of our house. We've removed the asbestos shingles around the area, but we know that we'...
I am insulating and installing drywall on a 45 degree wall that has the roof sheating exposed at this time. Do I staple the reflectix insulation...
We have a big 'ol metal shed that's slightly rusty and very unattractive. We're thinking of painting but aren't sure of what type of paint to use a...
In my 30 year old house, I'm having trouble with one particular room preparing to paint.I spent 20 hours removing the wallpaper and glue with a mix...
If round outside corners (round cornerbead) are installed (for aesthetics), what is typically used to fill the gap between the hardwood baseboard a...
For some reason, the paint and primer is peeling off of our 3 year old steel exterior door. We need to repaint it. Is this better done by a profe...
Need some advice on extending our patio. It's plain old concrete but the only problem is that it will extend over a sprinkler head. I'm concerned...
I have just purchased a house in Oceanside, California. It was built in 1926 and has an historic plaque. It is in need of tremendous TLC. I am w...
I am trying to install crown molding on a ceiling with a slight pitch. I need to find out how to calculate the cuts to make the corners fit proper...
I am looking for any suggestions for the rectory or minister's house owned by our church. It has been vacant for a few years and the diocese frown...
Whenever someone turns on water (showers, faucets and toilets) on the third floor of my ten year old house, we hear banging sound from inside the w...
Does anyone know a manufacturer that makes a high grade quality vinyl shutter? The ones in home centers seem flimsy at best. Thanks!