Was wondering if anyone knows how to remove the glue that bled through on vinyl floor when vinyl was installed on a new house....any ideas?.....thanks
We have a few broken siding pieces. It is asbestos. We understand that there is a manufacturer who will provide duplicates in non-asbestos siding...
Does anyone make precast foundation walls for collapsed foundation walls? W do not want to go the traditional concrete blk. or poured concrete syst...
I JUST BOUGHT A PUSSY WILLOW TREE FROM A PERSON DOWN THE STREET. AND I'M NOT SURE HOW TO PLANT IT, CARE FOR IT... ETC...**HELP!!**WHERE DO I START?
I am one of the fortunate home owners to have a dirt crawl space. I encounter the usual problem of smell and dampness associate with it. I attemp...
I removed the waistcoating in my dining room including the base moulding. I finished the walls and resanded and restained all the old moulding that...
Our lower kitchen cabinets were in bad shape so we sanded them down. We thought we had the stain matched to the upper cabinets, but once everything...
I removed the wainscoting in my dining room including the base moulding. I finished the walls and resanded and restained all the old moulding that ...
Does anyone know of a new type of epoxy window glazing compound, name and etc.?
I built a 12x24 shop, but the slab set up before it could be properly floated. The floor is rough and a little uneven. Can I do anything to fix it?
how do i square up a large area. i am setting forms for a garage floor and i know there is a three point measuring formula for squaring, but i dont...
I found the attached message in the FAQ section and it makes no sense to me. I also have a brick first story exterior wall and concrete foundation ...
I found two sites about lime wash on the net one is in New Zealand and one in Austrailia. Is lime wash used in the US and where might I find it?
I want to buy a joiner, and have found two types. The first is a "plate joiner", the second is a "detail buscuit joiner". I am a hobbyist, not a ...
We bought an older house (1978) in south florida with carpeting that needs to be pulled up right away. We haven't decided what kind of flooring we ...
I would like to build some high, wide shelving for lightweight items in the garage. say 18" deep by 8 feet long. I can attach to wall and ceiling a...
Hello, i was planning on building a wrestling ring.. Does anyone have any ideas about going about with this?AllBill
Just bought a newly constructed house. One interior & one exterior door are out of plumb. Both fit door frame at bottom & stick out about an inch...