Block foundation problem... New construction..
I am in the process of building a 2-story home that measures 30x44. My father and I have done all of the work by ourselves with the exception of digging the found...
I am in the process of building a 2-story home that measures 30x44. My father and I have done all of the work by ourselves with the exception of digging the found...
1
answersSituation: I have aluminum siding on my house, and recently I had a concrete patio installed, that butts up against the house AND the garage. I have an exposed s...
0
answersapparently there are two types of units that are used to treat well water if it is found to be too acidic. One type of unit uses limestone chips (calcite) over w...
0
answersHi,I am working on a team project this semester for a class at MIT called 2.009. In 2.009, Product Engineering Processes, students work in large teams of approxi...
1
answersAbout a month ago my kitchen faucet needed replacing. My brother in law installed it but since then when I turn on the water and only in the double sink where the...
1
answersIs teflon tape acceptable on natural gas threaded pipe joints for a water heater?
2
answersI am remodeling an old ranch house. Has anyone used regular burlap sacks to wallpaper with? I would like ideas regarding how to try this. F. Ford
0
answersI have a Janitrol forced hot air system. I went to turn it on for the first time this year and it lights,burns for 5 seconds then goes out repeats this cycle 2 o...
5
answersreplacing current furnace and possible adding a/c - any input regarding which brand is better? Based on info on board - do not think I will be going with Bryant.T...
2
answersThis only happens in the Master Bath. All other faucets are normal.When you turn on the hot water to normal, (moderate), flow in either one of the two sinks all i...
1
answersIs there an appreciable difference between an 18 and 20 gauge sink? I know that thickness matters and the smaller number indicates a thicker sheet of metal, but ...
1
answersReplaced an old water heater with a new 40 gal. gas water heater. Used new water pipe port adaptors (3/4 npt to 3/4 copper)in the tank ports. After cleaning the t...
1
answersHi,I am working on a team project this semester for a class at MIT called 2.009. In 2.009, Product Engineering Processes, students work in large teams of approxi...
0
answersReplaced an old water heater with a new 40 gal. gas water heater. Used new water pipe port adaptors (3/4 npt to 3/4 copper)in the tank ports. After cleaning the t...
0
answersThis morning I turned on my furnace for the season. I noticed that the pressure gauge was going into the danger zone so I shut the system off. This happened a f...
0
answersI have just purchased a 3 bedroom 1968 ranch home, and I do not want to heat the unfurnished basment, but the previous owner had cut three openings in the supply ...
0
answersCan anyone help me, i am using more Kwh according to my meter, than what my appliances use.It doesnt add up. is it possible that i am requiring more power then th...
1
answersI have a 1968 ranch house and have recently replaced some of the cedar siding shingles.Under the shingle was this 3/8 board then there was 1/2 inch plywood under ...
0
answersKenmore Heavy Duty Model #110 Washer. How do they define heavy duty? Could it be by the weight of the load? It seems these models can handle alot. I just washed 4...
3
answersApprox. 15yrs back there was a vinyl moulding available that had adhesive on one side and when attached to inside of a window you cut a piece of thin plexiglass t...
0
answers