I'm considering a second-floor addition to a 70+ year-old frame house in the Northeast. It would create a master suite with a new full bath. The ex...
Does anyone know what to set the blade at when cutting crown moulding for 45*, 22 1/2*, 25* angles? I want to be able to cut it laying flat on the ...
i am searching for the calculations for building stairs. i have read both of the 'rosendahl's' books. No help atall.
My wife and I have been searching for months on a book on different bar designs. We have been unsuccessful. Any ideas on books or magazines which...
HELLO IM TRYING TO GET POWER to a light switch thru an outlet ...i have power to the outlet / white to white blk to blk and ground to grnd. then ...
I HAVE A FIVE YEAR OLD CONCRETE WALKWAY THAT THE LAST TWO YEARS ONE SLAB HAS BEEN CHIPPING AWAY. THIS WINTER I HAD TO USE CALCIUM/SALT FOR THE BAD ...
I need a cast stone manufacture for a fireplace I am building in a house. Also, crushed and recast limestone is a possiblity.
I have a concrete slab garage floor. Since I do a lot of work on my cars I would like to cover the floor with some kind of paint/treatment that wi...
i want to learn how to calculate and build stairs with the treads and risers routered into the stringers. i already have the "rosendahl's" books an...
i want to learn how to calculate and build stairs that have the treads and risers routered into the stringers.
Im looking for a CRANE Crieton style toilet seat. This is the old Saddle Seat style. We are looking for pink, but will consider any color. The name...
Im trying to fine a Crane Criteon style toilet seat. This is the OLD saddle seat style....We want a new one in pink but will consider any color. Or...
Previous homeowner used liqued nails to glue mirrors on a painted plaster wall. The only way I know to remove them is to smash them with hammer an...
I recently had a couple large tree stumps removed, including digging out surface rootsto a depth of 2 - 2.5 feet, and out to 15feet from the stumps...
My very old Coleman floor furnace has died! Am searching for manufacturers of floor furnaces. Can anyone help?
I am framing in my house. i want some doorways to have arches. How do I go about doing this?