Hybrid furnaces
Is there a hybrid furnace that works with a propane how water system? We are installing solar panels and want to cut our use of propane. All the ...
COMMUNITY FORUM
about 3 hours by BV008721
0
answers16
Views
how to put french doors in my garage
i have a set of french doors but no frame and i would like to take are garage door down and put them up so i need to no how to make the frame work
about 6 hours by BV008720
0
answers18
Views
Square feet
How many square feet are in a 5 by 5 by 3?
about 8 hours by BV008719
0
answers24
Views
cut/trim concrete
I just got a Ryobi AG 4531G angle grinder and some 4 1/2 masonry cut off discs. When I opened the angle grinder up, it says to use only Type 27 dep...
about 8 hours by BV008718
0
answers23
Views
Kitchen Cabinets
What is the best way to get rid of the pink hue out of white maple cabinets? Thanks Wendy K ...
about 10 hours by BV008717
0
answers19
Views
Who is AmeriCabinets? Do they sell American made or imported cabinets?
I was wondering ... www.americabinets.com are they wholesalers? retailers? do they sell American made or imported cabinets? who owns it? is it ...
about 14 hours by BV008716
4
answers1435
Views
Thinking Outside "The Cottage" playhouse
Please help me find an owners manual for this thing. My family would really appreciate it. Thanks a bunch Dan
1 day by BV008124
211
answers57865
Views
hot water in kitchen but not in bathrooms
for the last 3 weeks the hot water in both bathrooms (sinks & showers) have been getting colder until they are virtually luke warm/cold, there is s...
2
answers77
Views
NOVI bath with jets - stains I can't get out
The bath is probably plastic and around the drain area is a yellow stain made by the hard water standing there for days or even weeks when we don't...
1 day by steinmania
0
answers84
Views
Duracraft Model 50537 Wood Lathe manual needed
I have a springfield/duracraft wood lathe that a family member gave me and I'm trying to find a manual for it. Does anyone know where to go to fin...
1 day by BV008713
6
answers4086
Views
stripped phillips screw
I've got small small phillips screws to remove. Unfortunately, they're stripped! What's the best way to get them out? I have heard of "drilling ...
1 day by BV008712
4
answers1284
Views
curtains matching my walls
I have Valspar vegas green bedroom wall and I'm not sure what color curtains I should hang.
1 day by BV008710
0
answers44
Views
First floor noise after finishing basement
Recently we finished our basement in our 2 year old house. As part of the finish soffits were built to enclose the exposed duct work. After complet...
1 day by BV008709
0
answers57
Views
patching with cement
I have an existing Michigan basement that was gone over with cement. However, the cement has since started to crumble and fall out over the years. ...
1 day by BV008380
1
answers77
Views
Creaky floors in winter...would a humidifier help?
I want to know if a humidifier would help creaky floors that are silent in the summer and creaky in the winter.
1 day by BV008707
0
answers45
Views
DELTA CORDLESS 18V BATTERIES
ANYONE KNOW WHERE TO GET REPLACEMENT BATTERY PACKS FOR A DELTA CORDLESS DRILL? EVERYWHERE I HAVE TRIED RETAIL DOES NOT CARRY THEM ANYMORE. ...
2 days by BV008706
5
answers6418
Views
ortable hand planer/door
I'm about to plane just about every sticky door in my house using a power hand planer. Should I remove material from the doorknob side or the hinge...
2 days by BV008661
2
answers284
Views
tinted primer not same as house color
My painter today has used leftover primer on my house from a previous job. The color of the body of my house will be cream or light yellow/cream. B...
0
answers55
Views
Rustic wooden bed frame with storage compartments
Is it possible to get a build diagram for this bed frame?
2 days by BV008703
4
answers513
Views
Fasco Model 656 Serial 456937
Looking for replacement glass in Fasco Model 656. Has two glass lenses (one left and one right).....one cracked when taking cover off to clean :(....
2 days by BV008701
0
answers47
Views
