By accident I left a dryer sheet on an end table and a book got sat on top of it. The dryer sheet is now stuck to the finish of my end table - how...
COMMUNITY FORUM: MISCELLANEOUS
Hi, Does anyone know how to remove the print from the outside of pvc pipe? Thanks Regards, Doug
I have salvaged from a neighbor's apartment a beautiful green marble two-sink counterop 1.5" thick and 72" long. If I can cut it to 36" it will per...
Hello, I need help installing outdoor speakers. My concern is drilling through vinyl siding. Can anybody help me by explaining how to drill vinyl ...
We live near Reno, NV and have and aging 3 rail cedar fence. We can no longer get the 3 hole rails locally. Does any one know if there is a suppl...
I want to pour some concrete next to my house but just above my foundation wall is a wooden header (probably 2 - 2X8s on edge) that is about 8 inch...
The motor on my delta model 22-540 12 1/2" thicknes planer burned out, the rest of planer is OK. Anybody have a used motor from a planer that is ...
dgclover, Thank you for your insightful posts. I spent the last year running around in circles with all the steel home builders. The dance i...
We are trying to restore a house that is over 350 years old. We had a contractor do the addition and now that we have run out of money we are tryi...
I opened some old super glue with some scissers and some glue got on the scissors now the scissors are glued shut what can I use to free the scisso...
We've just completed remodeling several rooms and our contractor over-estimated our tile order. His mistake is your gain. All of these tiles were ...
does anyone have any huntington tile A-106 qurter rounds and some 731 bull nose tile?
I am looking for a motor for a Craftsman 12 inch direct drive saw. The model # is 113.299131 and the part # is 62459 This is an old saw and *****...
I'm new to this forum, and hope I'm on the right message board. My 1959 raised-ranch house has pinewood tongue & groove paneling over the fireplace...
Just built a small wheelbarrow planter for back yard. Painted it with opaque redwood stain. (2 coats). Stenciled sides and back using "Dry" Acrylic...
Does anyone know where I can get a folding shower door that was Manufactured by Kinkead Industries?
I am planning to lay brick over a concrete walk. Here's my question: To secure the brick (1/2" pave brick), what is the best method - mortar, q...
I am looking at wood playsets. What type of wood should I use? Here in NC Pressure treated is popular, but I am looking for something that splint...
I have read that pressure treated wood contains cancer causing chemicals. My husband and I are looking at purchasing a children's outdoor playset ...
We have *something* gnawing loudly in our walls at night. The sound drives me nuts. It has only been going on for a few nights now, and seems to mo...