Expert advice from Bob Vila, the most trusted name in home improvement, home remodeling, home repair, and DIY.

Bob's Bloggers

A community of bloggers who live and die to DIY

architectural history

Historic Moldings & Trim

By The Craftsman on May 16, 2012

The trim installed in your home has gone through a lot of changes over the last couple centuries. On the simple frontier homes of early colonial America there wasn’t much need for the extraneous trim and moldings present in European homes at the time. It was a wild country and the focus was on survival. But as the country matured so did its stylistic tastes in molding.

Why Moldings?

Moldings came about because they both simplify the process of assembling a house and beautify it. Form follows function, right? Transitions from one type of material to another in a house can be very difficult to perfect. Doorjambs meet walls, walls meet floors, and ceilings meet walls. These are all places where it saves time and material if you have a little leeway with the perfection of your cuts. Slight imperfections can be hidden by moldings, which ultimately make the transition look even nicer than a clean transition could.

A good baseboard hides the ugly transition between plaster/drywall and your floor. It gives a perfectly straight line and a finished feel to the space. Doorways are another element that need room to fit just right and in this situation casings hide the imperfect joints and shims used to level the door. And let’s not forget the thousands of hands that will handle the doorway over its lifetime. A semi-gloss casing is much more resistant to marking than the flat paint on your walls.. Even crown molding helps to dress up the transition from wall to ceiling. Done properly it can make a room seem taller or shorter depending on what the designer wants.

Period Trim

There are hundreds of trim styles and patterns available at mills and home stores today. Going into detail about each individual architectural style is well beyond the scope of this article, but we would like to give a few details about some of the more common house styles across America and the moldings typically found within. Unless noted otherwise the trim was typically painted a semi-gloss bright white color.

Greek Revival (1825-1860)– Typically wide bandings of trim both inside and out were common with significant door casings reminiscent of classical Greek and Roman styles. Dentils are a detail used almost to excess in this style. Large crown molding is also typical

Gothic Revival (1840-1870) – A simpler version that the ornate Queen Anne, except for very detailed vergeboards on the steep exterior gable ends.

Queen Anne/Victorian (1880-1910) – Tall baseboards and ornate, highly detailed moldings were common in this style.

American Craftsman (1905-1930) – This style took a decidedly earthy turn from its predecessors. The trim patterns became greatly simplified and more geometric with fewer rounded designs. Baseboards and casings were often finished natural or stained and varnished to reveal the natural wood's color.

Moderne (1930-1959) – The modern age brought about a massive desire for simplicity and minimalism. Smooth patterns with minimal or no pattern on short, thin casings and baseboards ruled the day.

Another great source for for finding the right style moldings for your historic home is the Kuiken Brothers Design Guide that has molding sets for specific historic house styles. Here you can find molding choices for many of the styles listed above.

Matching the appropriate moldings to your historic home will add value and character. If you feel your home has had its period trim replaced by contractor grade products you can easily bring the character back by restoring this valuable element back to your home. Next time we’ll talk a bit more about how to properly install these elements. From how to cope joints to where to start your installation we’ll cover the important points you need to know.

 

Visit The Craftsman »

blog comments powered by Disqus