i would reccomend still getting your flashing under your shingles but where you can not get into the mortar have some metal made for you that has a lip at the top to hold some tar or lexel to seal it up.this seems to work the best for me on reroofs that have bad metal on the chimney but no chimney flashing

NO!!

There is only one way to flash and counterflash Brick, stone or box siding chimnies reguardless of it being a side mounted, ridge mounted or field plane mounted chimney.

Stepflashing HAS to be installed and COUNTERFLASHING must be installed after.

You will never prevent the Headlap from leaking without steplashing and never prevent the stepflashing from leaking without counterflashing.

Before any flashing is applied you should wrap the entire chimney base with ice and water barrier. Then do the roofing and stepflashing. Then do counterflashing after stepflashing.

I do not reccomend this being done by anyone that has not done this as a proffession.

I am a 30 year roofer and could give you what you need to know.

Request with your reply and I will explain the entire process for you.

OddBall !!

It is important to note that the chimney itself and the interior of your home can be severly damaged without ever showing any signs of a leak. You need a trained eye !!

How did you fairly new house with no chimney flashing make it past the building inspector ? Someone is responsable for that !!

hi i need helps

i am having a big leak around my chimney and the 2 vent pipes; we did not know some flashing should be installed first (like stepflashing & counterflashing).how do i solve the problems after the ondura panels have been installed?

SOS harry

Hi, I can help you better with a photo of the chimney from the front then the back. (from the corners showing the side too) Not enough info in your description, photos` of the pipes too.

If you can`t post a photo, detail the problem better for me, when you say pannels.....it`s tricky !!