COMMUNITY FORUM

emcspadden

03:52PM | 09/02/05
Member Since: 08/14/05
18 lifetime posts
Bvhvac
I don't know which end is up anymore!!!

I have a twin built in 1908 in South Jersey. I think it is balloon construction, though I am not really sure what that is. The basement is damp and moldy (a problem I am working on) as is the rest of the state and there is no insulation in most of the house. Most of the walls are plaster and not in the best of shape.

I am having the old siding (insulbrick from 1945) torn down and vinyl siding put up. I am also having the roofs worked on.

During all of this, I would like to insulate the house before spending $400 a month on utility bills this winter! However I don't know what to do.

I am absolutely paranoid about mold and don't want anything that would trap mositure or provide a habitat for mold/mildew. I would also prefer to have something blown in vs. tearing all the walls out and putting up drywall. The spots where the plaster is cracked with holes is covered in panneling from the 70's...I plan on spackling over that vs. tearing it out...tearing it out would open up a whole other can of worms!

What is my best course of action?

Thanks in advance for any advice you can lend.

tomh

04:04PM | 09/02/05
Member Since: 07/01/03
558 lifetime posts
For insulation purposes the easiest short-term solution is to blow in cellulose insulation. Your house is not so air-tight that moisture should be a problem. The insulation is formulated with additives that do not support development of molds, kill insects and is fire retardant as well. In balloon frame structures, you will consume a little more insulation if it goes into the joist spaces. Since you are doing the siding, now is the easiest time to blow in insulation.

Tearing down interior walls and adding new modern wiring, plumbing, insulation and drywall is worth consideration if your budget can handle it. Once you blow in insulation, the job becomes larger, just because it will generate more waste debris. In any event, blown in insulation will work fine. the biggest drawback is it may limit your future access to wall interiors for wiring and such.

emcspadden

05:52PM | 09/02/05
Member Since: 08/14/05
18 lifetime posts
well, an electrician used to live here, so I think the wiring is fine (no knob and tube - with the exception of possibly one interior wall - and I will be running sheathed electrical cable and cable to the attic before insulating anyway).

as for the plumbing, everything is copper with the exception of PVC repairs and the original cast iron sewer pipe running from the second floor to the basement. When do you think it will rust out?

as for the insulation...i only want to do this once!!! my pockets are a little deep, but i don't want to waste any money. is cellulose the way to go? what about drying time? the moisture problem is a somewhat serious one...one wall actually sweats when it rains...if feels like a jungle!!! my dehumidifier runs constantly on the medium setting. whatever I decide to do, the insulation only has as long as it takes to install to dry. as soon as it is finished, the siding will be put up. I might be able to stall a day or so, but that is it.

please keep in mind...i am allergic to mold!

as for drywalling, the guy from the cellulose company said I would probably be ok if i don't remove the wood when removing the plaster. he said i should just drywall right over the slats and i shouldn't lose too much.

can severely cracked plaster walls withstand foam insulation? in my readings it looks superior to cellulose, but everyone thinks THEIR product is the best!

please help!!! thank you in advance.


Click_to_reply_button
Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

captcha
type the code from the image

Anonymous

Post_new_button or Login_button
Register

Oversize windows let the outside in, even in a cozy cottage bathroom like this one. A roller screen and wraparound shower ... Built on a rocky island in the Drina River, near the town of Bajina Basta, Serbia, this wooden house was cobbled together ... Large steel-framed windows flood the interior of this remodeled Michigan barn with daylight. The owners hired Northworks A... Edging formed with upside-down wine bottles is a refreshing change. Cleverly and artistically involving recycled materials... A Washington State couple called on BC&J Architects to transform their 400-square-foot boathouse into a hub for family bea... Similar to the elevated utensil concept, hanging your pots and pans from a ceiling-mounted rack keeps them nearby and easy... Few projects are more fun than upcycling a vintage piece in a surprising way. Outfitted with a sink and a delicately tiled... The thyme growing between these stepping stones adds a heady fragrance to strolls along this lush, low-maintenance garden ... Decoupage is an easy way to add any paper design to your switch plate, whether it is wallpaper, scrapbook paper, book page... Twine lanterns add pops of crafty—but sophisticated—flair to any outdoor setting. Wrap glue-soaked twine around a balloon ... When securely fastened to a tree or the ceiling of a porch, a pallet and some cushioning make the ideal place to lounge. V... Reluctant to throw away any of those unidentified keys in your junk drawer? Hang them from a few chains attached to a simp... A stripped-down model, sans screened porch, starts out at $79,000. Add the porch, a heated floor for the bath, and all the... Salvaged boards in varying widths and colors make up the dramatic accent wall in this attic space. The high-gloss white of... This garden shed has been decked out to the nines. Designer Orla Kiely created the intimate home for a flower trade show, ...
Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon
 
webapp1