I am working on the windows of a 100 yr old house. The inside sash moldings were attached using what I, for the lack of a better term, refer to as decorative finishing washers. The washers are similar to shoulder washers except that they are inserted into the molding, 1/2 inch hole, about 3/16 of an inch. The overall height of the washer is approx. 1/4 inch. The bottom of the washer has a slot thru wich the screw passes.
Does anyone know where I can acquire these washers?
[This message has been edited by MartyGolf (edited August 02, 2003).]