COMMUNITY FORUM

michelwat31

08:24PM | 02/20/05
Member Since: 02/20/05
4 lifetime posts
Bvwindows
I just saw Bob Vila's program about pre-hung interior doors this past week.

I have been looking to replace the doors in our house but it is a manufactured home and I am not certain that all the doorways are square. If I wanted to replace the doors, what would be the best way to guarantee that the doorways are square first? Or is it possible to get the door and let its molding square the doorway? (I don't mind there being a slight space between the wall and the frame of the door as long as it is not visible.

k2

05:15AM | 02/21/05
Member Since: 06/06/03
1250 lifetime posts
Welcome Michelle,

Not sure how much help I'll be (as I'm not familiar with manu. homes--although I doubt they're all that much different from typical construction).

But it's certainly not all that unusual that doorways aren't all that square. Hence, the SHIM.

So typically you plumb up the pre-hung door using 2 shims (working opposite each other)--one pair high on the door, the other low. How far you push shims inward toward each other determines plumb (or not).

(Is this making sense?)

Regards,

-k2 in CO

Moderator, Miscellaneous Forum

http://www.bobvila.com/BBS/Miscellaneous

joed

06:28AM | 02/21/05
Member Since: 09/17/02
527 lifetime posts
To verfy the squareness of any rectangular opening measure the diagaonals. Measure form bottom left to the top right and from bottom right to top left. If the measurements are equal then the opening is square.

michelwat31

06:42PM | 02/21/05
Member Since: 02/20/05
4 lifetime posts
Thank you for the information. I was getting discouraged over the door. I didn't realize it was so common for doors to be off. Our house is 17 years old and set on permanent foundation and the particular door to which I am refering is between the two halves of the home. So I am sure some of the settling that has happened over the years could affect the doorway's being straight.

What you said makes sense somewhat but I don't think it is something my husband and I could do ourselves. We have no tools. I was just interested so that I could see if the pre-hungs would be a good idea if we ever hire a contractor or home repairman to do it for us.

lrodptl

06:57AM | 05/17/05
Member Since: 02/13/99
74 lifetime posts
If you have not done them yet let me add: My wife and I just hung 4 interior doors. She had never done it and I have done 3 in my life but none in 5 years. The first one took 3.5 hours and the last one an hour. Unlike most things we read we removed the door and shimmed,leveled and secured the hinge side jamb first. WE then attached the door and shimmed and secured the latch side. Keep checking with a level. After each shimming we closed the door and checked the reveal. There are references and guides online so read those first and adapt to your situation.
Click_to_reply_button
Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

captcha
type the code from the image

Anonymous

Post_new_button or Login_button
Register

Oversize windows let the outside in, even in a cozy cottage bathroom like this one. A roller screen and wraparound shower ... Built on a rocky island in the Drina River, near the town of Bajina Basta, Serbia, this wooden house was cobbled together ... Large steel-framed windows flood the interior of this remodeled Michigan barn with daylight. The owners hired Northworks A... Edging formed with upside-down wine bottles is a refreshing change. Cleverly and artistically involving recycled materials... A Washington State couple called on BC&J Architects to transform their 400-square-foot boathouse into a hub for family bea... Similar to the elevated utensil concept, hanging your pots and pans from a ceiling-mounted rack keeps them nearby and easy... Few projects are more fun than upcycling a vintage piece in a surprising way. Outfitted with a sink and a delicately tiled... The thyme growing between these stepping stones adds a heady fragrance to strolls along this lush, low-maintenance garden ... Decoupage is an easy way to add any paper design to your switch plate, whether it is wallpaper, scrapbook paper, book page... Twine lanterns add pops of crafty—but sophisticated—flair to any outdoor setting. Wrap glue-soaked twine around a balloon ... When securely fastened to a tree or the ceiling of a porch, a pallet and some cushioning make the ideal place to lounge. V... Reluctant to throw away any of those unidentified keys in your junk drawer? Hang them from a few chains attached to a simp... A stripped-down model, sans screened porch, starts out at $79,000. Add the porch, a heated floor for the bath, and all the... Salvaged boards in varying widths and colors make up the dramatic accent wall in this attic space. The high-gloss white of... This garden shed has been decked out to the nines. Designer Orla Kiely created the intimate home for a flower trade show, ...
Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon
 
webapp2