COMMUNITY FORUM

RedSnapper

07:17AM | 02/09/08
Member Since: 02/08/08
2 lifetime posts
Bvwindows
I have a double car garage but one of the garage doors won't work with the remote, on top of that the outside keypad won't work for that door either (it works for the other one fine, and did work previously, but now doesn't recognize the password). So two problems, i need to get the password working so i can manually enter on the outside keypad to open the door, and secondly i need to get my remote working for that door. The other door and remote work fine, i have changed the baterry on the outside keypad also, and it lights up. i also changed the battery on the remote. The previous owners said they never used them, it's a 2001 home.

Billhart

08:36AM | 02/09/08
Member Since: 04/25/05
1915 lifetime posts
You did not indicate th model number for specific information.

But here are generic infomration for remotes and keyless remotes.

http://www.chamberlain-diy.com/diy04/faq/0,1341,uid-fGNmbmFgZ2ZnaA==_610,00.html

RedSnapper

08:14AM | 02/10/08
Member Since: 02/08/08
2 lifetime posts
Thanks, but the link is dead, it's a Craftsman 1/2 HP

Billhart

01:55PM | 02/10/08
Member Since: 04/25/05
1915 lifetime posts
That link is good, but there is something flaky about the site, Often you need to try it several times.

But here is a another link.

http://www.liftmaster.com/consumerweb/service/faq/faqlanding.htm

Chamberlain make the Sears, Chamberlain, Liftmaster units and they all work the same.

"it's a Craftsman 1/2 HP"

That is not a model number.

The model number will be in the form of 139.5xxxx

BV000350

07:48PM | 02/09/13
Power to the unit but the chain won't travel. Moves freely but won't open or close door.

BV002184

09:45PM | 09/26/13
The problem I seem to be having is that the door operates normally under no-load conditions but as soon as I attach the door, the door will only go down a couple inches and stop.

BV002184

09:47PM | 09/26/13
I also just changes the springs

BV005823

10:35AM | 09/27/14
Nice but i am not able to open the link? Can you tell me about this?
http://replacemyremote.com

maryepstein

03:48AM | 09/30/14
Member Since: 09/30/14
1 lifetime posts
You can change your door or you can also consult to a good organization that help you to select the proper door. If you need some ideas, read at http://www.northhomegallery.com.au/versiclad.

BV006053

12:16PM | 10/19/14
I have a craftsman139.53985 door , when I press the wall button door moves up short way, stops and all lights go out.
A while later lights are on and goes down a little and lights go out.
Click_to_reply_button Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

Anonymous

Post_new_button or Login_button
Register

Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon