COMMUNITY FORUM

me41767

08:23AM | 02/03/08
Member Since: 02/06/07
4 lifetime posts
Bvmisc
I have a 1/2 hp Craftsman chain drive,billion code garage door opener 139.53648SRT2 made in 8/98. It came with two (3)button remotes and I had it programmed into the homelink system on my Chrysler vehicle and my boyfriends chrysler vehicle. Now we have seperated and I do not want him to have access to the garage. I have figured out how to erase all the codes so that the only way to open the door is from the hard wired wall button. But everytime I try to reprogram the remotes, it activates the homelink button in my car again which leads me to believe that his would work as well. I have been told that I should buy new remotes and that would solve the problem. So I went to Sears and the salesman told me I did not need to do that. He said to just unplug the unit for 10 minutes, then erase the codes and reprogram the remotes. I tried this and still it reactivates the homelink with the same code. I purchased a keyless entry pad thinking that it would offer a different code but he sold me the wrong one. The one he sold me is for a 315mhz and I think I need one for a 390mhz? I am frustrated and desperate for the correct information.Please help if you know how!!!!!

Billhart

05:28PM | 02/03/08
Member Since: 04/25/05
1918 lifetime posts
From my cross reference that is a billion code system. But by the date it should be a Security plus unit.

What color is the Learn button on the back of unit.

And I don't know anything about the HomeLink system.

You might want to contact the manufactor's tech support.

http://www.chamberlain-diy.com/diy04/contact_us/0,1341,uid-d2lqbWFnaWVibA==_1775,00.html

Or the tech support here.

http://www.aaaremotes.com/liftmaster.html

They sell the keypads on their website (as does Chamberlain). But I am afraid to give you a specific model number because I am not sure of your model.

Here is the Sears cross reference.

me41767

01:59AM | 02/04/08
Member Since: 02/06/07
4 lifetime posts
The learn button is green

Billhart

04:16AM | 02/04/08
Member Since: 04/25/05
1918 lifetime posts
http://www.chamberlain-diy.com/pdfdocs/114A1902.PDF

Yes, that is a billion code unit.

This is a manual for a unit that uses the same replacement control board. Your unit might have more or less lights or other minor differences.

I am not sure, but I seen comments that imply that the for the billion code system the remotes come fixed with a code and can't be changed. If that is the case then you need to replace the remotes and then earase and reprogram for the new one(s).

You can try removing the batteries from the remotes and press the button to use up an power. Then wait a couple of minutes before replacing the battery.

But if the code is built in it won't do any good.

You might verify this with with either Chamberlain or AAARemtoes.

Here is a link with replacement remotes.

http://www.aaaremotes.com/liftmaster81lm.html
Click_to_reply_button
Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

captcha
type the code from the image

Anonymous

Post_new_button or Login_button
Register

Painting your front door a striking color is risky, but it will really grab attention. Picking the right shade (and finish... Built on a rocky island in the Drina River, near the town of Bajina Basta, Serbia, this wooden house was cobbled together ... Large steel-framed windows flood the interior of this remodeled Michigan barn with daylight. The owners hired Northworks A... Edging formed with upside-down wine bottles is a refreshing change. Cleverly and artistically involving recycled materials... A Washington State couple called on BC&J Architects to transform their 400-square-foot boathouse into a hub for family bea... Similar to the elevated utensil concept, hanging your pots and pans from a ceiling-mounted rack keeps them nearby and easy... For windows, doors, and mirrors that could use a little definition, the Naples Etched Glass Border adds a decorative flora... The thyme growing between these stepping stones adds a heady fragrance to strolls along this lush, low-maintenance garden ... Decoupage is an easy way to add any paper design to your switch plate, whether it is wallpaper, scrapbook paper, book page... Twine lanterns add pops of crafty—but sophisticated—flair to any outdoor setting. Wrap glue-soaked twine around a balloon ... When securely fastened to a tree or the ceiling of a porch, a pallet and some cushioning make the ideal place to lounge. V... Reluctant to throw away any of those unidentified keys in your junk drawer? Hang them from a few chains attached to a simp... A stripped-down model, sans screened porch, starts out at $79,000. Add the porch, a heated floor for the bath, and all the... Salvaged boards in varying widths and colors make up the dramatic accent wall in this attic space. The high-gloss white of... This garden shed has been decked out to the nines. Designer Orla Kiely created the intimate home for a flower trade show, ...
Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon
 
webapp2