does anyone know any good ways to make a cushion arm rest that goes all the way around a 4x8 hold'em poker table...keep in mind the table at both ends are round..if someone could give me in detail ways to go about this....i've built the table now i want the railing !!
COMMUNITY FORUM
- Forum >
- Home Design >
- hold'em poker arm rest question
Hi
there is a product called "perfect rails" that used to be available at casinosupply.com, and you might be able to find it somewhere.
I've seen a rectangle table done up with a rail, and it was just two boards attached by a square bracket. it was covered first with carpet padding, and then with vinyl.
I guess if you get a thin enough board, you could do the same thing. It's just a matter of getting the bend in the board without it cracking.
there is a product called "perfect rails" that used to be available at casinosupply.com, and you might be able to find it somewhere.
I've seen a rectangle table done up with a rail, and it was just two boards attached by a square bracket. it was covered first with carpet padding, and then with vinyl.
I guess if you get a thin enough board, you could do the same thing. It's just a matter of getting the bend in the board without it cracking.
