COMMUNITY FORUM

DanO

04:23PM | 03/10/06
Member Since: 11/11/02
2271 lifetime posts
** How do you remove the kick plate on a Kenmore dryer model 110.96589210? **

Did you look at the links that were previously supplied? That information should be there.

Dan O.

www.Appliance411.com/parts/?ref411=Kenmore+Dryer

The Appliance Information Site

=D~~~~~~

rseiter

07:44PM | 03/10/06
Member Since: 03/09/06
3 lifetime posts
* Did you look at the links that were previously supplied? That information should be there *

I did. I believe there are two versions of the whirlpool kenmore. Mine has clips at the bottom of the kick plate and a lint filter beneath the door. The other (which was what was in the other links if I read correctly) has clips at the top of the kick plate and a lint filter on the dryer top panel. The picture I linked to looks like mine. If I'm missing something here please let me know!

Thanks!

rseiter

06:41AM | 03/11/06
Member Since: 03/09/06
3 lifetime posts
I looked at the links again this morning and found the information at this one http://www.applianceaid.com/whirlpool-dryers.html#four

Thanks for your help Dan.

DanO

08:41AM | 03/11/06
Member Since: 11/11/02
2271 lifetime posts
** found the information **

Glad to hear you figured it out.

Dan O.

www.Appliance411.com/parts/?ref411=Kenmore+Dryer

The Appliance Information Site

=D~~~~~~

lamarrgt

04:10PM | 03/04/08
Member Since: 03/03/08
1 lifetime posts
My model # is 110.68932792

I tried the flat screwdriver to the middle and it didn't pull the clamps out.. If you can help I'd sure appreciate it!

DanO

10:03PM | 03/04/08
Member Since: 11/11/02
2271 lifetime posts
** model # 110.68932792 **

On that model the lower access panel looks to be able to be removed by pulling the top of that panel *away from the cabinet* and then lifting it off the two lower support spring clips. Optionally, sometimes a putty knife can be inserted between the side of the cabinet and the edge of the access panel and twisted to work the panel free toward the top.

BTW. The use of a screw driver may chip the paint. A putty knife is usually a better tool to use if needed.

Dan O.

www.Appliance411.com/parts/?ref411=Kenmore+Dryer

The Appliance Information Site

=D~~~~~~
Click_to_reply_button Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

Anonymous

Post_new_button or Login_button
Register

Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon