COMMUNITY FORUM

t4781fd

09:42AM | 03/05/05
Member Since: 03/04/05
2 lifetime posts
Bvelectrical
I have a 8 yr old craftsman 1/2 HP garage door opener that moves in the close direction even when the door is closed. This occurs I activate the opener via wallmount or remote. Manually, the door operates great...no binding and the senors appear to be ok. I suspect I have a code problem. Any solutions? Thanks. TD

Jim D

11:02PM | 03/06/05
Member Since: 01/06/01
345 lifetime posts
T4781FD - hi, can you please answer a couple questions about what's happening?

1. Does the door stop on its own when you close it after it's been opened by the garage door opener (GDO)? Or, does it keep trying to close after the door's contacted the floor and then open back up?

2. At any point, does the door stop and then the light on the GDO starts flashing - and you may hear a loud clicking sound?

Offhand, I'm not thinking it's a code problem...depending on the age of your GDO, it uses magnets to sense the stop points at both ends of the door's travel. The magnet at the "door closed" end may have gotten moved and the GDO doesn't sense it when the door's closing. The other thing I'm thinking of is some type of failure in the circuitry where it doesn't "see" the door open signal.

Post back with the answers to the questions and hopefully we can get you fixed up. Regards! Jim D/West Point, VA

rpxlpx

08:28AM | 03/08/05
Member Since: 03/13/00
1678 lifetime posts
On my Craftsman opener, the limits are set by adjustable contacts, that make connection to another contact, which is moved back and forth by a screw action as the opener operates. If the wire on one of those contacts has broken, it might explain your problem.

t4781fd

03:32PM | 03/08/05
Member Since: 03/04/05
2 lifetime posts
The GDO is 8 yrs old. I cannot open the GD via the remote or the wall unit. When I activate the GDO, the sprocket/chain travel in the close direction, even though the GD is already closed. The problem occured approx. one week after my next door neighbor and I were experiencing frequency problems...we were able to open each others GD with our wall units and/or remotes (this lasted approx. 5 days). Still need help before I buy another GDO!

Thanks. T4781FD/MI

Jim D

12:12AM | 03/10/05
Member Since: 01/06/01
345 lifetime posts
T4781FD - thanks for posting back. You said when you activate the GDO, it moves in the "close" direction. Have you let it continue to operate for a few seconds to see what it does? Does it then try to bounce back open, or does it stop its motor and the light starts blinking on & off rapidly/GDO makes loud clicking sound?

I have an old Craftsman unit at the house that's done this as well...if I let it keep traveling in the "close" direction, the unit reversed direction about 2 seconds after the door contacted the floor. The GDO pushed on the bracket and it looked like it wanted to bend, but then the circuitry sensed the door was closed/its path was obstructed and it reversed. It recently quit doing it after some drastic weather changes, and I can only troubeshoot it on the weekends...but I rarely open that door (2 car garage with 2 separate doors).

Letting the GDO operate a few seconds after the door contacts the floor may help determine if the door close limit contact has a broken wire (thanks, RPXLPX!), the magnet is malfunctioning, or if the circuitry inside the GDO is truly bad.

You and your neighbor's wall units must be wireless...my wall units are hardwired to the GDOs. It is possible the interference you both experienced with each other's units could have caused the circuitry in your GDO to fail, although your unit's door obstruction circuit should've kicked in as I described it above after 2 seconds or so of the GDO pushing the door closed after the door contacted the floor.

I'd recommend examining the door limit hardware up on the GDO track/rail...as RPXLPX stated, it could be a broken wire that's not visible from the floor, a contact that's shifted position, or something else easy to spot and fix. I'd also try the GDO again and see if it reverses direction if you let it go for a few seconds. If you see/hear something that concerns you (e.g., the bracket starting to bend out of shape, smoke from the unit, etc.), you can shut it off by hitting the remote button again. Or, you can position yourself on a ladder and unplug the unit from its outlet. Be sure to position the ladder so it's not in the path of the door as it opens. Let us know how you fare - regards! Jim D/West Point, VA
Click_to_reply_button
Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

captcha
type the code from the image

Anonymous

Post_new_button or Login_button
Register

Few projects are more fun than upcycling a vintage piece in a surprising way. Outfitted with a sink and a delicately tiled... Built on a rocky island in the Drina River, near the town of Bajina Basta, Serbia, this wooden house was cobbled together ... Large steel-framed windows flood the interior of this remodeled Michigan barn with daylight. The owners hired Northworks A... Edging formed with upside-down wine bottles is a refreshing change. Cleverly and artistically involving recycled materials... A Washington State couple called on BC&J Architects to transform their 400-square-foot boathouse into a hub for family bea... Similar to the elevated utensil concept, hanging your pots and pans from a ceiling-mounted rack keeps them nearby and easy... For windows, doors, and mirrors that could use a little definition, the Naples Etched Glass Border adds a decorative flora... The thyme growing between these stepping stones adds a heady fragrance to strolls along this lush, low-maintenance garden ... Decoupage is an easy way to add any paper design to your switch plate, whether it is wallpaper, scrapbook paper, book page... Twine lanterns add pops of crafty—but sophisticated—flair to any outdoor setting. Wrap glue-soaked twine around a balloon ... When securely fastened to a tree or the ceiling of a porch, a pallet and some cushioning make the ideal place to lounge. V... Reluctant to throw away any of those unidentified keys in your junk drawer? Hang them from a few chains attached to a simp... A stripped-down model, sans screened porch, starts out at $79,000. Add the porch, a heated floor for the bath, and all the... Salvaged boards in varying widths and colors make up the dramatic accent wall in this attic space. The high-gloss white of... This garden shed has been decked out to the nines. Designer Orla Kiely created the intimate home for a flower trade show, ...
Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon
 
webapp1