COMMUNITY FORUM

amystours

08:16AM | 08/30/05
Member Since: 08/29/05
3 lifetime posts
Bvelectrical
I have a Kenmore 110.82673810. It will fill up, but then does nothing. You can hear a slight humming as well. You have to put it on the spin cycle to drain it, and then put it again on wash so it can fill and rinse. Occasionally, it will not spin. A slight bump or tug on the machine is sometimes enough to get it going. You can constantly hear a slight humming noise. What is going on?? My laundry is getting pretty tall!! Thanks alot in advance!

Amy Hastings

Historian/Tour Guide

www.southerncarriagetours.com

DanO

10:29AM | 08/30/05
Member Since: 11/11/02
2271 lifetime posts
** Kenmore 110.82673810 will fill up, but then does nothing. **

That could be caused by a problem in the machine's water level control (see the following link), the timer or even the motor.

- How does a washer's water level control work?

LINK > http://www.appliance411.com/links/jump.cgi?ID=803

** A slight bump or tug on the machine is sometimes enough to get it going. **

A bump or the machine *cabinet* or just timer knob? The latter might suggest a problem in the timer as it is a common symptom of a timer problem.

- Kenmore 110.82673810 Washer Timer

LINK > http://www.appliance411.com/data.php?rc=1125

JFYI

Dan O.

www.Appliance411.com/?ref411=Kenmore+Washer

The Appliance Information Site

=D~~~~~~

amystours

12:00PM | 08/30/05
Member Since: 08/29/05
3 lifetime posts
Thank you for your reply, to answer your "bumping" question, you actually have to physically bump the machine with your hip, or either grab the barrel thingy (the part you put your clothes in) and give it a little tug. However, this isn't working anymore for me! I am still hearing the humming noise...

Amy Hastings

Historian/Tour Guide

www.southerncarriagetours.com

DanO

01:46PM | 08/30/05
Member Since: 11/11/02
2271 lifetime posts
** you actually have to physically bump the machine with your hip, or either grab the [tub] and give it a little tug. **

Sorry but I have no idea what would cause that. Maybe a loose connection of some sort or something jammed up???

I'm afraid it would likely need to be checked out to determine the cause. There is nothing common I know of that would create such a condition.

JMO

Dan O.

www.Appliance411.com/?ref411=Kenmore+Washer

The Appliance Information Site

=D~~~~~~

tiddrma

01:22AM | 08/31/05
Member Since: 07/02/04
21 lifetime posts
Check the drive belt on the motor. Might be slipping / broken / off.

Outlaw

01:32AM | 08/31/05
Member Since: 02/11/04
27 lifetime posts
I can pretty much guarantee the belt is off....this is a direct drive machine....it has no belt.

amystours

04:30AM | 08/31/05
Member Since: 08/29/05
3 lifetime posts
I want to thank everybody for posting your replies so promptly for me. I suppose I need to go in there and start bailing out water so we can take this thing apart and see what's going on with it. I seem to remember a website that had a blown up illustration of a washer, I'll see if I can find that to go on. Thanks again, everyone!

Amy Hastings

Historian/Tour Guide

www.southerncarriagetours.com

DanO

09:36AM | 08/31/05
Member Since: 11/11/02
2271 lifetime posts
The only place you'll find exploded parts views for that Kenmore washer is S ears (see the following link) but you can see how common 'direct dive' washers get accessed at the second link below.

- Kenmore 110.82673810 Exploded Parts View

LINK > http://tinyurl.com/cos4m

- Accessing a 'Direct Drive' washer coupling

LINK > www.the-appliance-clinic.com/ddcoupler.html

JFYI

Dan O.

www.Appliance411.com/?ref411=Kenmore+Washer

The Appliance Information Site

=D~~~~~~
Click_to_reply_button Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

captcha
type the code from the image

Anonymous

Post_new_button or Login_button
Register

Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon
 
webapp2