COMMUNITY FORUM

ACD

11:58AM | 01/08/06
Member Since: 10/15/02
359 lifetime posts
Bvelectrical
Doesn't close properly, sometimes the light will stay on unless you push the door in and hold it a few seconds, but if you close a cabinet door near it the light will come back on. It is a Jenn Air single wall oven model JJW9530CAB. Any idea on how to adjust it, and is there a way to clean behind the face galss?

DanO

03:37PM | 01/08/06
Member Since: 11/11/02
2271 lifetime posts
** Doesn't close properly, sometimes the light will stay on unless you push the door in and hold it a few seconds **

That could be caused by 'weak' door hinge springs or possibly a 'stiff' oven door seal.

** Any idea on how to adjust it **

If the hinge springs have lost their tension, the hinges (which come with the springs) would likely need to be replaced. The type of hinges used on your model range (see the following link) don't usually have much (if any) kind of 'adjustment' that can be made but someone would actually have to look at them to see.

- Jenn-Air JJW9530CAB Oven Door Hinge and Spring Asm.

LINK > http://www.appliance411.com/data.php?ps=71003350

** is there a way to clean behind the face glass? **

the face glass... of the oven door I assume? The door should be able to be disassembled to clean the interior of the glasses. You can see an exploded parts view of your model at the following link:

- JJW9530CAB Exploded Parts View

LINK > http://www.appliance411.com/data.php?psm=JJW9530CAB

JFYI

Dan O.

www.Appliance411.com/parts/?ref411=JennAir+Range

The Appliance Information Site

=D~~~~~~

ACD

06:20AM | 01/09/06
Member Since: 10/15/02
359 lifetime posts
Has done it from day one. The only time it will close fully is when doing the self cleaning and the automatic door lock closes the door. It is like the hinges are not set right, the tension seems ok. When you push in the top of the door, it springs back about 1/2" did this from day one. Could it havbe been wrenched in shipping?

DanO

08:05AM | 01/09/06
Member Since: 11/11/02
2271 lifetime posts
** Could it have been wrenched in shipping? **

That *might* be a possibility but if so, I don't know how it would be corrected.

Since it was like that from "day one", did you have it looked at under warranty??

Dan O.

www.Appliance411.com/parts/?ref411=Jenn-Air+Oven

The Appliance Information Site

=D~~~~~~

ACD

11:48AM | 01/09/06
Member Since: 10/15/02
359 lifetime posts
It is still under warranty, and I submitted a question into Maytag on this, and waiting on a response. I posted this at the same time I submitted the service request.

DanO

12:01PM | 01/09/06
Member Since: 11/11/02
2271 lifetime posts
** It is still under warranty, and I submitted a question into Maytag **

No need to 'submit a question', if the product is in warranty and is not functioning properly, just call a authorized servicer (see the following link) for service.

- Maytag Service Locator (Maytag owns Jenn-Air and provides product support)

LINK > http://www.appliance411.com/links/jump.cgi?ID=231

BTW. I suggest you call a *local* company if possible rather than someone at an 800 number (see the following link).

- Who To Call For Home Appliance Service?

LINK > http://www.appliance411.com/service/whotocall.shtml

JMO

Dan O.

www.Appliance411.com/?ref411=JennAir+Oven

The Appliance Information Site

=D~~~~~~

ACD

12:30PM | 01/09/06
Member Since: 10/15/02
359 lifetime posts
I submitted a question as to the hinge adjustments to see if it is something I can do myself instead of having to take time off to have someone come in to do it.

DanO

02:03PM | 01/09/06
Member Since: 11/11/02
2271 lifetime posts
** I submitted a question as to the hinge adjustments **

If it isn't mentioned in the owner's manual they wouldn't likely be able to tell you anyway. They don't usually give out any kind of service information, just the common sense stuff (eg. "make sure the oven racks are not hitting the door", etc.).

When you do eventually find out the problem, let us know if you can. Maybe it will help others whom might come across your messages.

JMO

Dan O.

www.Appliance411.com/?ref411=Jenn-Air+Oven

The Appliance Information Site

=D~~~~~~

ACD

09:50AM | 01/10/06
Member Since: 10/15/02
359 lifetime posts
I am going to take it apart this weekend and see just what is up with it now that I have the parts breakout. I need to get the inside glass cleaned up anyway, looks like crap from all the construction dust and stuff.

DanO

03:50PM | 01/10/06
Member Since: 11/11/02
2271 lifetime posts
** I am going to take it apart this weekend **

Be careful what you do to an appliance while its under warranty. You could void any remaining warranty.

JFYI

Dan O.

www.Appliance411.com/?ref411=JennAir+Oven

The Appliance Information Site

=D~~~~~~
Click_to_reply_button Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

Anonymous

Post_new_button or Login_button
Register

Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon