we bought a new front loading washing machine. Even when lightly loaded, these machines seem to vibrate more during the spin cycle. My machine sits on a tile floor. Is there any way to minimize vibration or otherwise stabilize the machine so it does not keep creeping around the tile floor as a result of these vibrations?
thank you
COMMUNITY FORUM
- Forum >
- Electrical & Lighting >
- Washing machine vibration
** Is there any way to minimize vibration or otherwise stabilize the machine so it does not keep creeping around the tile floor **
Assuming all the shipping braces have been removed from the machine according to the installation instructions, I think the question will likely need to be "is there a way to stabilize the FLOOR..."
If the machine is on an upper house floor, that floor (not just the tiles - although that could be a problem too) may not be suitable for the machine (see the following link). Front-load washers are much worse then top-load washers for needing *very* stable flooring to operate on.
- Time and Money Saving Appliance Installation Tips
LINK > http://www.appliance411.com/links/jump.cgi?ID=623
JMO
Dan O.
www.Appliance411.com/parts/?ref411=Clothes+Washer
The Appliance Information Site
=D~~~~~~
Assuming all the shipping braces have been removed from the machine according to the installation instructions, I think the question will likely need to be "is there a way to stabilize the FLOOR..."
If the machine is on an upper house floor, that floor (not just the tiles - although that could be a problem too) may not be suitable for the machine (see the following link). Front-load washers are much worse then top-load washers for needing *very* stable flooring to operate on.
- Time and Money Saving Appliance Installation Tips
LINK > http://www.appliance411.com/links/jump.cgi?ID=623
JMO
Dan O.
www.Appliance411.com/parts/?ref411=Clothes+Washer
The Appliance Information Site
=D~~~~~~
