** How do I put back the front panel on my maytag washer **

What problem are you having exactly?

Also, I don't know what you mean by "clips are no longer in door".

Dan O.

www.Appliance411.com/parts/?ref411=Maytag+Washer

The Appliance Information Site

=D~~~~~~

When I pulled off the front panel to fix leak, the steel clips fell out that hold the front panel to the top panel. I can't figure out how clips are suppose to be installed so I can put front panel back on.

Thanks,

The open end of the triangular clips (see the following link) get 'squished' together and inserted into square holes in the top of the front panel.

- Front Panel Clip

LINK > www.appliance411.com/data.php?rcpn=22001650

That can usually be done by inserting the longer of clip 'feet' into the hole first (towards the front of the panel) and then squishing the top of the clip with pliers, etc. and then inserting the other 'foot' into the hole. Once the pressure is released the clip with expand again to hold it in place in the hole.

I hope that helps.

Dan O.

www.Appliance411.com/parts/?ref411=Maytag+Washer

The Appliance Information Site

=D~~~~~~

Thanks Dan, that did it.