I have a Kenmore Elite HE3 Dryer Model# 110 82826101. It turns off periodically showing the error code E1. I read earlier posts that it's the Thermistor for the same dryer but different models. Would my model follow the same pattern as the others for this error code? I have no manual either to replace it if in fact it is the Thermistor
COMMUNITY FORUM
- Forum >
- Electrical & Lighting >
- Kenmore Elite HE3 Dryer stopping periodically!
** [Kenmore dryer model 110.82826101] periodically showing the error code E1 **
That failure code on your model is suppose to indicate an electrically open thermistor sensor (see the following link). It could however also be caused be a problem in the wiring to the thermistor or the the electronic control that receives that sensor data.
- Kenmore 110.82826101 Thermistor
LINK > www.appliance411.com/data.php?rc=1181075
** I have no manual either to replace it **
There is also a repair video for that particular part at the page linked above. Click the " > Video " link.
JFYI
Dan O.
www.Appliance411.com/parts/?ref411=Kenmore+Dryer
The Appliance Information Site
=D~~~~~~
That failure code on your model is suppose to indicate an electrically open thermistor sensor (see the following link). It could however also be caused be a problem in the wiring to the thermistor or the the electronic control that receives that sensor data.
- Kenmore 110.82826101 Thermistor
LINK > www.appliance411.com/data.php?rc=1181075
** I have no manual either to replace it **
There is also a repair video for that particular part at the page linked above. Click the " > Video " link.
JFYI
Dan O.
www.Appliance411.com/parts/?ref411=Kenmore+Dryer
The Appliance Information Site
=D~~~~~~
ichagcud Quick Quid
