COMMUNITY FORUM

rpena007

04:03AM | 08/27/04
Member Since: 08/26/04
1 lifetime posts
Bvmisc
Bob,

Recently I installed 4 Hampton Bay Motion Sensor Lights in the exterior of my home. Two of them work like a charm. However, the other two just recently started malfunctioning. The switch inside the garage remains on of course supplying power two both lights. They have both operated properly for the past three months since installation. However, I have noticed for this past week that the lights are still on during the day with bright sun when I arrive home from work. I have made NO changes to the lights as they are exactly the same as when I installed them. I did try resetting them by turning the switch off for a couple of minutes then back on. The lights come back on as normal for about 20 seconds, blink three times to tell me they are functioning properly then turn off because they detect light. I checked them several times and they stay off until dusk. Again they do function properly when I reset them during the day as photocell keeps them off with sunlight. But once dusk they work fine but remain on at dawn and have to be reset now each afternoon. I could understand one sensor going bad but two? I would call hampton bay directly but cannot obtain their number. Any help you could provide would be much appreciated.

embdaw

03:46PM | 04/01/05
Member Since: 03/31/05
2 lifetime posts
I have had this same problem. I installed 5 HB exterior lights and all 5 no longer turn off during the day. They are just under 6 months old, and the first began malfunctioning after only 2 months...any suggestions!!!

~*~Erin~*~

MaxH42

11:43AM | 01/22/06
Member Since: 01/21/06
4 lifetime posts
I just had a Hampton Bay photovoltaic cell MELT on me. The dawn-to-dusk ones, without the motion sensors, we have two by our garage, and one was staying on all the time. I replaced the bulb and shone a flashlight at the cell (underneath the fixture), and I saw it was glowing like a lit cigarette. The plastic started to melt, and I watched in disbelief a few more seconds and ran for the switch.

If anyone finds the number for the mfr, please post it here.

-Max

doug seibert

01:15PM | 01/22/06
Member Since: 08/10/02
843 lifetime posts
1-877-527-0313

1-800-841-1350

and another 1-800-749-3267

MaxH42

01:24PM | 01/22/06
Member Since: 01/21/06
4 lifetime posts
Wow, thanks! This is a Hampton Bay "UPC# 25916814205", "SKU# 240-336", and "Vendor: 11370". I found a discussion of them here: http://www.bobvila.com/BBS/Lighting/160/160/flat-page1.html

fourchalk

04:34PM | 01/22/06
Member Since: 01/18/06
21 lifetime posts
After reading all the negative comments about Hampton Bay's exterior lighting, I would hope that all defective products are being packed up for return to Home Depot.

I couldn't think of a quicker remedy than to have Home Depot return car loads of defective products to the manufacturer.

Frank Fourchalk

Security Consultant/Columnist

http://www.yourhomesecurity.ca

MaxH42

04:45PM | 01/22/06
Member Since: 01/21/06
4 lifetime posts
Actually, I already filled out a report on http://www.cpsc.gov/ .

HammerTime01

08:24PM | 04/29/07
Member Since: 04/18/07
26 lifetime posts
that's a freaky situation
Click_to_reply_button Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

captcha
type the code from the image

Anonymous

Post_new_button or Login_button
Register

Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon
 
webapp2