04:32AM | 07/08/07
Member Since: 07/06/07
8 lifetime posts
Hi, just wanted to know if you recieved a copy of or an email for 113.19771 for I need one also if you wouldn't mind sending me a copy I would appreciate it. you can send it email pfd file or how ever I just need one thnks.


04:55AM | 07/08/07
Member Since: 09/22/06
2 lifetime posts
I know I have a paper copy, and will check for an ecopy when I return from vacation. At worst I can scan in the paper one and send it to you. send me your email address to Thanks. I will do it later in the week.


05:16AM | 07/08/07
Member Since: 07/06/07
8 lifetime posts
thank-you so much . enjoy your vacation!


05:23AM | 07/08/07
Member Since: 07/06/07
8 lifetime posts
Hi new here just want to know if you recieved your munual i'm looking for the same one if so could you send it to me. thanks


12:27PM | 07/09/07
Member Since: 07/08/07
2 lifetime posts
After reving the cover and wiring to the switch I took my motor to the local small engine repair man. The instructions are UNDER THE COVER! He just switched two wires to different teminals. It tells you what goes where. Took less than 5 minutes.


05:04PM | 07/18/07
Member Since: 07/06/07
8 lifetime posts
This manual is much needed not only by me but many on this site is ther a way it can be posted on the site so they can click on it and down load it from here. how simple. I have gotten my recall Items but still need the owners manual 113.19771 or 113 1997751 i'll take either one Thanks you can post or email me with the pdf file.



05:19AM | 07/23/07
Member Since: 07/22/07
1 lifetime posts
I could use one of these manuals sent to me pdf or other format by e-mail thanks in advance. please send to


06:25AM | 07/31/07
Member Since: 07/06/07
8 lifetime posts
Just ask to post my pdf manual that I sumitted don''t know how long it takes but the manual is 44 pages and in full saw there was a great need for it thats at the under craftsman Radial arm saws

Hope this helps youall Jenifer


06:11PM | 08/05/07
Member Since: 08/04/07
2 lifetime posts
I am attempting to assemble a mobile base for a 113.199250 and I'd like to get it right. Two wheels have breaks (?) and two do not. Which corners do these go on? Anyone have assy instructions?

Click_to_reply_button Inspiration_banner


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.



Post_new_button or Login_button

Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon