COMMUNITY FORUM

arefai

04:59PM | 04/22/04
Member Since: 04/21/04
2 lifetime posts
Bvmisc
How do I remove a concrete slab that is about 6X5 and about 3-4 inches thick? The problem is also that this slab seems to have been mixed with rocks. Please advise. Can I try and do this myself? If so, what tools do I need? If I need to hire a pro, any idea on how much the would charge. Thanks.

Adam

NJ

treebeard

03:00AM | 04/23/04
Member Since: 01/14/03
265 lifetime posts
...if you have a couple of the right tools. A sledge hammer is a must. A long pry bar would be good, too.

If the slab is only 3-4 inches thick, you should be able to use the sledg hammer to hammer away at the slab from the top creating cracks and weak spots. Reaelly wack away at it. Your should see cracks and breakage pretty quickly. Once the slab is cracked and fractured, you can us the pry bar to get underneath the concrete from the side, prying it up for removal.

Now, depending on your size, if you're a good size guy, with a little help, you might be able to pry up one side of the slab a little and stick another rock or timber under it, even just a little. That will create an air space under the slab with no support or cushion to help take the hammer blows. Once it's up, hammer away and it should break up pretty easy....

...unless it's a lot thicker than you claim.

Now you're problem will be where to get rid of the stuff.

arefai

01:01PM | 04/23/04
Member Since: 04/21/04
2 lifetime posts
Thanks for your reply. I re-measured and the thickness is actuall 7 inches. Would the same procedure you outlined below still work for that thickness? Also, I'm concerned about the rocks that seem to have been mixed in with the concrete - will it split. Would a sledge hammer of 12 pounds work? Thanks again.


treebeard

01:51PM | 04/23/04
Member Since: 01/14/03
265 lifetime posts
Yes, even a seven inch slab can be broken up by hand using that method. But it will take more blows and perhaps a heavier hammer (I use a 20lb). You'll be expending some effort to do this. If the slab is reinforced, you'll have a problem making pieces out of it.

But, you never know unless you try. And if you're determined to get rid of the thing, the worst that can happen is that you can't do it yourself, and you have to hire someone.

A little safety hint...like Norm would say, make sure you're wearing safety goggles to prevent chips of concrete or stone from hitting your eyes.

homebild

04:01PM | 04/24/04
Member Since: 01/28/03
694 lifetime posts
Rent an electric jackhammer from a tool rental company for a day.

Might cost about $60US dollars.

No one in their right mind would try to break up a 3-4" let alone a 7" slab with a sledge hammer and pry bar only.

treebeard

03:23AM | 04/26/04
Member Since: 01/14/03
265 lifetime posts
I would assume that experience loses out to opinion here, homebuld? Of course a jackhammer is a better option. But it's not the only one. The old methods some of us still know how to use work, and work well.

Those who can do...

Those who can't..........
Click_to_reply_button
Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

captcha
type the code from the image

Anonymous

Post_new_button or Login_button
Register

A simple banquette piled with pillows and lit from above with a wall sconce is a tempting spot to curl up with a favorite ... Built on a rocky island in the Drina River, near the town of Bajina Basta, Serbia, this wooden house was cobbled together ... Large steel-framed windows flood the interior of this remodeled Michigan barn with daylight. The owners hired Northworks A... Edging formed with upside-down wine bottles is a refreshing change. Cleverly and artistically involving recycled materials... A Washington State couple called on BC&J Architects to transform their 400-square-foot boathouse into a hub for family bea... Similar to the elevated utensil concept, hanging your pots and pans from a ceiling-mounted rack keeps them nearby and easy... For windows, doors, and mirrors that could use a little definition, the Naples Etched Glass Border adds a decorative flora... The thyme growing between these stepping stones adds a heady fragrance to strolls along this lush, low-maintenance garden ... Decoupage is an easy way to add any paper design to your switch plate, whether it is wallpaper, scrapbook paper, book page... Twine lanterns add pops of crafty—but sophisticated—flair to any outdoor setting. Wrap glue-soaked twine around a balloon ... When securely fastened to a tree or the ceiling of a porch, a pallet and some cushioning make the ideal place to lounge. V... Reluctant to throw away any of those unidentified keys in your junk drawer? Hang them from a few chains attached to a simp... A stripped-down model, sans screened porch, starts out at $79,000. Add the porch, a heated floor for the bath, and all the... Salvaged boards in varying widths and colors make up the dramatic accent wall in this attic space. The high-gloss white of... This garden shed has been decked out to the nines. Designer Orla Kiely created the intimate home for a flower trade show, ...
Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon
 
webapp1