COMMUNITY FORUM

Kevetts

07:55AM | 05/02/03
Member Since: 05/01/03
2 lifetime posts
Bvtools
Question: Is it safe to use an 8in dado blade on a 10in table saw? Oviously, I've never used a dado blade. Thanks.

whit.millwork

05:18PM | 05/02/03
Member Since: 04/10/03
116 lifetime posts
yes, you can use an 8" dado on a 10" table saw.Make sure both have same arbor (center hole) probably 5/8"

Mark Hammond

01:30PM | 05/03/03
Member Since: 05/09/01
246 lifetime posts
Hi Kevetts,
Millwork is correct since there are few sets that are larger in diameter. Being new to dadoes you should know that most dado and rabbet cuts are no more than 3/8" high by 3/4" wide and regardless of the diameter they usually run at about 13-15/16ths wide for the whole set. There are of course variations but.....There should be a dado insert for your table saw,(if not find one of the right make to use) and check the specs on the saw for any restrictions regarding the use of dadoes. Good luck and take it slow.......MJH

Kevetts

06:44AM | 05/07/03
Member Since: 05/01/03
2 lifetime posts
Thanks for the info! I'll be good.
Click_to_reply_button
Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

captcha
type the code from the image

Anonymous

Post_new_button or Login_button
Register

This garden shed has been decked out to the nines. Designer Orla Kiely created the intimate home for a flower trade show, ... Built on a rocky island in the Drina River, near the town of Bajina Basta, Serbia, this wooden house was cobbled together ... Large steel-framed windows flood the interior of this remodeled Michigan barn with daylight. The owners hired Northworks A... Edging formed with upside-down wine bottles is a refreshing change. Cleverly and artistically involving recycled materials... A Washington State couple called on BC&J Architects to transform their 400-square-foot boathouse into a hub for family bea... Similar to the elevated utensil concept, hanging your pots and pans from a ceiling-mounted rack keeps them nearby and easy... For windows, doors, and mirrors that could use a little definition, the Naples Etched Glass Border adds a decorative flora... The thyme growing between these stepping stones adds a heady fragrance to strolls along this lush, low-maintenance garden ... Decoupage is an easy way to add any paper design to your switch plate, whether it is wallpaper, scrapbook paper, book page... Twine lanterns add pops of crafty—but sophisticated—flair to any outdoor setting. Wrap glue-soaked twine around a balloon ... When securely fastened to a tree or the ceiling of a porch, a pallet and some cushioning make the ideal place to lounge. V... Reluctant to throw away any of those unidentified keys in your junk drawer? Hang them from a few chains attached to a simp... A stripped-down model, sans screened porch, starts out at $79,000. Add the porch, a heated floor for the bath, and all the... Salvaged boards in varying widths and colors make up the dramatic accent wall in this attic space. The high-gloss white of... Need a window and a door in a tight space? A Dutch door with a window may be your answer. These useful doors are split hor...
Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon
 
webapp1