COMMUNITY FORUM

358sammy

01:12PM | 02/06/05
Member Since: 02/05/05
3 lifetime posts
Bvmoney
Need a belt for Powr-Kraft table saw Model THS2730. Part no. for the belt is THS-XM-1120. Thanks!

k2

05:45AM | 02/07/05
Member Since: 06/06/03
1250 lifetime posts
Just a possible option: I've never tried one of these myself, but I've seen them in tool catalogs for years. They're "Power Twist" belts that you custom-fit for your machine.

I saw that both PowerTwist and Grizzly have them at Amazzon. I'm sure you can find elsewhere as well.

If you end up going this route, please report back and let us know how it's working for you!, I'm curious myself!

Regards,

-k2 in CO

Moderator, Miscellaneous Forum

http://www.bobvila.com/BBS/Miscellaneous

pacoawf

07:46PM | 03/12/05
Member Since: 03/12/05
1 lifetime posts
I had a THS2727A. I'm not sure if the belt was the same as yours, but I was also unable to locate a replacement after mine crumbled. I eventually gave up, and added a v-belt pulley and an external motor (an expensive option). Now I have a rockwell table saw that has a similar cogged belt, but I believe it is shorter. However you might check a Delta parts dealer and see if they have any the same size as yours. The last time I tried to find one was 5 or more years ago. Good luck.

1622TA

04:02PM | 05/08/05
Member Since: 05/07/05
2 lifetime posts
Did you ever find a source for the belt? Mine broke today, I need belt THS XM 1116. If you know a location to get one please post. thanks

DanMcGarigle

12:41PM | 02/24/06
Member Since: 02/23/06
3 lifetime posts
The Gates part number for a belt that is only 3/8" wide is 110XL037.

I talked with L.A. Rubber (323) 263-4131

02/24/2006.

They have the full width sleeve manufactured by Gates and can cut off a 1" belt from the whole sleeve. Minimum order is 4 pieces at 14.25 each.

They also stock other lengths besides the 11 inch.

Regards

Dan

menzel

10:04AM | 04/09/08
Member Since: 04/08/08
1 lifetime posts
I was looking for a replacement belt for a 10" table saw (Modle No. THS-2733), circa 1960. Found this company to have it in stock. Toolcraft Parts, (413)737-7331. Email: Parts@Toolkraft.com

DanMcGarigle

08:36PM | 04/09/08
Member Since: 02/23/06
3 lifetime posts
THANK YOU for locating a source for the belt for the table saw !

That's simply SUPER ! !

JDECHANEY

01:56PM | 06/24/08
Member Since: 06/23/08
1 lifetime posts
I SEE YOU FOUND A PLACE THAT HAS THE ACTUAL REPLACEMENT BELT THIS PAST APRIL. WAS IT THE ACTUAL REPLACEMENT AND DID IT WORK OK.
Click_to_reply_button Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

captcha
type the code from the image

Anonymous

Post_new_button or Login_button
Register

Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon
 
webapp1