I'm trying to replace shower door wheels (Allen-Stevens Corp., part # A-S, 3937). Since Allen Stevens has been acquired by Truth Hardware it doesn't look like make these parts. Does anyone know where I can find them (or have them made)?
COMMUNITY FORUM
- Forum >
- Parts & Supplies >
- Shower Door Roller Assembly
Did you find the part?
I need the anchor assemble because mine has cracked. I can get the replacement wheels at Home Depot bu I can not find teh anchor that attaches tot he top of the door, into whic the whells are attached
Thanks for your help
Derrick Rubin
I need the anchor assemble because mine has cracked. I can get the replacement wheels at Home Depot bu I can not find teh anchor that attaches tot he top of the door, into whic the whells are attached
Thanks for your help
Derrick Rubin
What I seem to be missing are the wheels. My contractor took the assembly to Home Depot (I believe) and they didn't seem able to do anything about the wheels. Based on what you said, I'll give it a shot. Otherwise, I haven't found any of the parts anywhere. I'll let you know if I have any luck.
I think I found the replacement part for the AS-3937 bracket for the tub/shower door.
Go to www.slide-co.com and check under shower door hardware.
They call it a Door Roller Bracket.
Part #193030; 192037; 193031 or 193032. You can call 800-475-4332 outside CA or else 909-887-1135
Go to www.slide-co.com and check under shower door hardware.
They call it a Door Roller Bracket.
Part #193030; 192037; 193031 or 193032. You can call 800-475-4332 outside CA or else 909-887-1135
Thanks! I'll give it a shot. I did have success with wheels at Home Depot. But, then I discovered one of the assemblies is bent and another is broken. So, only 1 door slides right now.
Go to www.aaascreen.com.
The piece number is either
M-6034,35,36 or 37. Found in the M section of the website, page 3 of 19 on their PDF.
Part number depends on the size, (3/4" or 7/8" wheel, flat or oval) Mine happened to be 3/4" Flat wheel.
Call Bob Cannon directly and order, they cost $7.48 for a packet of two brackets with wheels + about $5 S+H He was a super nice guy and they sent them out very fast:
Bob Cannon
208.734.8336
Fax: 208.735.2447
bob@aaascreen.com
Ian Savage
http://www.rolliboatfilms.com
The piece number is either
M-6034,35,36 or 37. Found in the M section of the website, page 3 of 19 on their PDF.
Part number depends on the size, (3/4" or 7/8" wheel, flat or oval) Mine happened to be 3/4" Flat wheel.
Call Bob Cannon directly and order, they cost $7.48 for a packet of two brackets with wheels + about $5 S+H He was a super nice guy and they sent them out very fast:
Bob Cannon
208.734.8336
Fax: 208.735.2447
bob@aaascreen.com
Ian Savage
http://www.rolliboatfilms.com















