When I run a hot shower and someone runs water from a sink, the washer machine or flushes a toilet etc, the shower water gets cold. Is there a solution for this? Thanks
The easiest/cheapest fix is to replace your shower fixture with a temp sensing unit. $100 or so for a cheap unit and you're in business. It will cut back your water pressure but maintain the temp.
maintain pressure - yes - repipe...lower pressure and this hot/cold situation when someone flushes the toilet is because the pipe run to your shower was prob. done with 1/2" pipe....if it had been piped with 3/4" this usually doesn't happen...at least it doesn't happen in my house (I ran 3/4" to within 10' of every fixture and I experience no press. drop or hot/cold problems regardless of what gets turned on throughout the house).
- 15 Old House Features We Were Wrong to Abandon
- 17 Tiny Bathrooms We Love
- 20 Insanely Easy 60-Minute Home Improvements
- 17 Design Inspirations for Mudrooms and Entryways
- 25 Clever Ideas for Repurposed Storage
- 16 Inventive Beds You Can Make Yourself
- Laundry Room Ideas to Knock Your Socks Off
- 30 Things Every Homeowner Should Know How to Do
- 11 Clever Alternatives to Kitchen Cabinets
- 10 Planters You Can Make Out of Everyday Things
- 21 "Expert Picks" for Fail-Safe Colors
- Garden Paths: 12 Easy-to-Imitate Stone Walkways
- 20 Ways to Make a Small Bathroom Big
- 9 Incredible Faux Finishes Possible with Paint
- 10 Sly Spots Where You Can Stash Your Storage Stuff
- 10 Eye-Catching Options for Your Front Door
- 10 Room Dividers to Bring Order to Your Space
- 11 Creative Garden Borders You Can Make—Easily!
- Tips and Tricks to Fit More into Less Closet Space
- Secret Rooms: 10 Special Spaces Hidden from Sight