COMMUNITY FORUM

hsthompson

04:04PM | 03/18/03
Member Since: 03/09/03
8 lifetime posts
Bvplumbing
I bought a 16yr old townhouse with the original water heater and may have to replace it soon. Should i install one of those pans to go beneath it? Also, do you have to put any type of teflon tape or thread sealant around the nipples? And the installation kits, from what i've been told i do not have to do any soldering. They compress the ends of the copper. Any other pointers appreciated.

bobp

04:39PM | 03/18/03
Member Since: 01/13/03
50 lifetime posts
HW tanks are relatively easy installation. Yes, definately put a pan under it, use teflon tapes on the threads, there should be only threaded connections, NO compression ones. Remove the aerators from your faucets before turning the water back on, it will prevent clogging when you turn the water on. Make sure the tank is completely full before turning on the power or lighting the gas. The biggest problem you will probably have is draining the old one, it can be a slow process.

Bob

hsthompson

01:04PM | 03/19/03
Member Since: 03/09/03
8 lifetime posts
Thanks bob. So the kit that they sell at Home Depot with one compression end and the other end threaded are not so good? I've never soldered before. So its best just to get all 3/4" copper pipe and elbows and solder away?

bobp

06:29PM | 03/19/03
Member Since: 01/13/03
50 lifetime posts
I'm not a real fan of compression fittings at the hw tank, but if you've never sweated lines, don't know anybody who has and aren't going to have it done by a plumber, then you'll probably be better off using compression fittings. If you don't sweat right, you'll end up with water everywhere in the middle of the night. Sweating is not real hard to learn, but must be done correctly.
Bob

rpxlpx

03:28AM | 03/20/03
Member Since: 03/13/00
1675 lifetime posts
I've had good sucess with the compression fittings.
You didn't say where the heater will be located. If it will be indoors, then a pan is very valuable. For a crawl space, I wouldn't bother, because if it's leaking you probably won't know it until the pan has flooded anyway. If no pan, sit the unit on some pressure treated wood so it doesn't rust. Untreated wood will "collect" termites.
If you install it yourself, be gentle when moving it. Don't drop it and don't scratch the paint.

erik peterson

12:48PM | 06/25/03
Member Since: 06/23/03
224 lifetime posts
When installing a "drip-pan" under a water heater its necessary to have a drain for it usually installed at the time of construction..If you install a pan without a drain whats the point? All the pans ive seen have the drain hole pre-cut into the pan so if the heater leaks this water will simply flow through the hole in the pan and onto your floor. Now if your remodeling or can drill into your floor to run the drain outside your house it will work. erik
Click_to_reply_button
Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

captcha
type the code from the image

Anonymous

Post_new_button or Login_button
Register

Put up a hinged mirror to conceal a recessed storage cabinet. In tight quarters, opt for a thin mirror that can sit almost... It turns out that many bath and kitchen cleansers contain chemicals that are dangerous to the skin and eyes, and often pro... So often we paint tiny nooks white to make them appear larger, but opting for a dark, dramatic wall color like this one—Be... Chocolate-colored walls and large window frames allow the exposed wood beams to take center stage in this small screened p... If you're not crazy about the idea of commingling plants and pool, this modern variation may be more to your liking. The s... Yes, a freestanding garage can become its own tiny house. Artist Michelle de la Vega has all the comforts of a modern resi... There’s nothing like a new set of cabinet hardware to refresh a room. The possibilities are endless: Go modern, rustic, or... Pursue what's known as the stack effect. To achieve it, open the windows on both the upper and lower floors, and as warm a... Like no other floor type, a checkerboard design works wonders to underscore the retro kitchen theme. Vinyl flooring, ceram... Twine lanterns add pops of crafty—but sophisticated—flair to any outdoor setting. Wrap glue-soaked twine around a balloon ... When securely fastened to a tree or the ceiling of a porch, a pallet and some cushioning make the ideal place to lounge. V... Incorporate nature into your lighting scheme by securing a dead tree in a concrete mold and draping your pendant lamp from... For the cost of a can of exterior paint , you can totally transform your porch. Paint the floor a hue that complements yo... In this urban apartment, a standard-issue patio became a serene and green perch by replacing the typical concrete with gro... If you put the washing machine in the mudroom, you can stop the kids from walking through the house in dirty, grass-staine...
Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon
 
webapp2