COMMUNITY FORUM

Timbear

07:31AM | 01/25/05
Member Since: 11/07/04
83 lifetime posts
Bvplumbing
I have noticed some soldered connections in my basement are showing green stains on them. That's corrosion right? They were done by "pros" and now I wonder can I clean them off with anything?

I recently did some soldering myself and would like to know if there are any good solvents I can use to clean off dried flux? Thanks,

LonnythePlumber

04:50PM | 01/26/05
The green is probably from the "pros' not washing off their fittings, using too much flux and not wiping their fittings. It's a same. The flux will eat through the pipe. I'm starting to have to replace copper at 25 years from the flux eating through.

I use soap and water, a wire brush and emery cloth. Hopefully your pipes are not pitted. If they are then you may need to do some more soldering. Or are you just in the mood and ready to do more? I would be hesitant to use solvents.

We can also get the green from hydro-carbons like from hair spray or some laundry products. I don't think that's the case here but I thought I should mention it.

Also small seeping leaks will leave a green residue and crust. It's most likely flux residue however.

Pipes I soldered working for my Dad thirty years ago are still clean and bright. But he made me carry soap and water in a crawl space when we would re-pipe.

Timbear

01:14PM | 01/27/05
Member Since: 11/07/04
83 lifetime posts
If it takes 25 years for the flux to eat through copper, I would not be so worried! Are you sure about that? Of course, I will clean 'em up and thanks for the tip.

LonnythePlumber

02:53PM | 01/27/05
The 25 years is a very broad statement. But yes it does take time for the flux to eat through.
Click_to_reply_button
Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

captcha
type the code from the image

Anonymous

Post_new_button or Login_button
Register

Painting your front door a striking color is risky, but it will really grab attention. Picking the right shade (and finish... Built on a rocky island in the Drina River, near the town of Bajina Basta, Serbia, this wooden house was cobbled together ... Large steel-framed windows flood the interior of this remodeled Michigan barn with daylight. The owners hired Northworks A... Edging formed with upside-down wine bottles is a refreshing change. Cleverly and artistically involving recycled materials... A Washington State couple called on BC&J Architects to transform their 400-square-foot boathouse into a hub for family bea... Similar to the elevated utensil concept, hanging your pots and pans from a ceiling-mounted rack keeps them nearby and easy... For windows, doors, and mirrors that could use a little definition, the Naples Etched Glass Border adds a decorative flora... The thyme growing between these stepping stones adds a heady fragrance to strolls along this lush, low-maintenance garden ... Decoupage is an easy way to add any paper design to your switch plate, whether it is wallpaper, scrapbook paper, book page... Twine lanterns add pops of crafty—but sophisticated—flair to any outdoor setting. Wrap glue-soaked twine around a balloon ... When securely fastened to a tree or the ceiling of a porch, a pallet and some cushioning make the ideal place to lounge. V... Reluctant to throw away any of those unidentified keys in your junk drawer? Hang them from a few chains attached to a simp... A stripped-down model, sans screened porch, starts out at $79,000. Add the porch, a heated floor for the bath, and all the... Salvaged boards in varying widths and colors make up the dramatic accent wall in this attic space. The high-gloss white of... This garden shed has been decked out to the nines. Designer Orla Kiely created the intimate home for a flower trade show, ...
Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon
 
webapp2