i reacently had my hotwater heater replaced.all of the fausets and other shower have the same hotwater pressure including the fauset,in the master bath, but the shower only has about half of the pressure that it did. the cold water is the same as before, its just the hot water, i have let it run for a good amount of time with no change. any suggestions would be greatly appreciated.thanks
COMMUNITY FORUM
Clean the shower head of debris that may have blocked the shower head when the water was turned back on.
Some folks when turning water back on do not remove shower heads and aerators thus they have a blockage from debris/sediment in the lines
Some folks when turning water back on do not remove shower heads and aerators thus they have a blockage from debris/sediment in the lines
