Im having a weak water flow from my kitchen faucet. Its not extremely weak but its about half of the power of the normal flow rate. I already tried unscrewing the filter piece thats attached to the faucet and it didn't change anything when i clean it. Can anyone help me out? Thanks
COMMUNITY FORUM
I mean remove the aerator run the water and if this still doesn't help then shut the water supple disassemble the faucet and and check for mineral deposits blocking the flow.
sometimes you have to have someone place a cup over the disassembled faucet turn on the water for a split second to make sure the lines are clear.
DO IT CAREFULLY as hot water can burn and cold water spritzing can cause a mess
Having ferrous metal piping like Galvanized would not block up on both lines at the exact same time.
It seems like a localized condition
sometimes you have to have someone place a cup over the disassembled faucet turn on the water for a split second to make sure the lines are clear.
DO IT CAREFULLY as hot water can burn and cold water spritzing can cause a mess
Having ferrous metal piping like Galvanized would not block up on both lines at the exact same time.
It seems like a localized condition
