Howdy again folks! Do all garbage disposals have their waste outlets at the same height?
Wondering because our new sink is quite deep, and puts the outlet 2" below the rough-in drain height. So even with trap installed, there will always be waste water sitting in the bottom of disposal (but still below grinder level).
Would rather find - if possible - a disposer that puts the outlet at a higher place - than replace the sink.
Your thoughts please -thanks in advance!
Regards,
-k2 in CO
Moderator, Miscellaneous Forum
COMMUNITY FORUM
All of the ISE (Insinkerators) have the same mounts and discharges. And they reband them for several other people such as Sears.
One other brand that I know of is Waste King (Annehiem {sp?} Manufacturing). So check with them.
Howver, there is a limited space to work with to have the grinding mechnism and suspect that they won't be much different.
Off hand don't know of any other manufacture.
One other brand that I know of is Waste King (Annehiem {sp?} Manufacturing). So check with them.
Howver, there is a limited space to work with to have the grinding mechnism and suspect that they won't be much different.
Off hand don't know of any other manufacture.
