COMMUNITY FORUM

amermorg

12:25PM | 03/22/05
Member Since: 03/19/05
5 lifetime posts
Bvmisc
I am looking for the following parts for a king-seely (craftman) table saw model number 103.23833 8 inch. motor aligment rod 37636, rail guide 37150, rail bracket 37739, motor rail 37644, rail bushing 37821. rail bushing clip 37743 and moter mount 37104 Can anyone help me thanks Mac

DSTEELE1

07:28PM | 03/27/05
Member Since: 01/21/05
25 lifetime posts
Hello Mac. I have a 8 inch tablesaw model 103.24241 that some parts may fit to your model even though are part numbers do not match. The old wood working machine ( OWWM ) web site has a owners manual reprint of the model I have. Take a look and see if that might work. My phone number is 208-463-0348. I reside in Nampa ID.

Sincerely,

Dale Steele

lebourdais

05:08PM | 07/03/05
Member Since: 07/02/05
5 lifetime posts
Hi Dale,

I also have an 8 inch craftsman tablesaw model 103.24241 that I'm attempting to restore. I have the basic saw but no motor mount or accessories.

I have the Operating Instructions and Parts List that I downloaded from OWWM so I can see the drawings of the motor mount.The deminsions or photo would be fantastic if I have to make the mount from scratch. The table insert I can probably make from something available locally. The Miter Gauge and Fence are the real problem.

Maybe my luck is changing and I'm about to find what I need on the Bob Vila Site.

I appreciate any help you can give me.

Sincerely,

Ray LeBourdais - Narrowsburg, NY

[email protected]


amermorg

02:32AM | 07/04/05
Member Since: 03/19/05
5 lifetime posts
I found the parts I needed for my King-Seely on E-Bay. Mac

lebourdais

07:43AM | 07/14/05
Member Since: 07/02/05
5 lifetime posts
Great BBS ... located most of the 8" craftsman saw parts I need for my restoration project. Thank you Dale and Nancy Steele. I'm expecting the parts today or tomorrow.

However, I still need the MITER GAGE ... table groove measures 7/32" x 5/8". Spare gage anyone? Thanks, Ray.

[email protected]

lebourdais

02:13PM | 07/16/05
Member Since: 07/02/05
5 lifetime posts
I'm still looking for the motor mounting bracket hardware as well as the miter gage I mentioned above. WHEW! ... I'm almost there! Ray.

[email protected]

bmisky

02:49PM | 09/10/07
Member Since: 09/09/07
1 lifetime posts
Hi

I just acquired a Sears 103.24241 table saw but it is missing the miter gauge. Have you had any success in locating one.

Thanks

Bill
Click_to_reply_button Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

Anonymous

Post_new_button or Login_button
Register

Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon
 
webapp2