COMMUNITY FORUM

Any one know where I can find mounting clips for these registers? I lost one of mine, and I'd rather find one than try to fabricate one! Thanks!

If anyone is still looking for these I do have 5 currently. Send me an email if interested in a couple.
Remove the 3's for the correct email.
333eckiejr88333at333yahoo333.com333

FINALLY! I know this is about acquiring these vents, but finding help removing is not easy. Thanks to crljenak for confirming that the middle fin comes out. I thought it was something like that, but was afraid to pry too hard. So, here's the secret. The top of the middle vent pulls out and then the whole thing pivots down and off. I actually had to push the middle vent and bend the 2 little pieces of metal along the top a bit to loosen the fin up enough for it to pull free. I'm posting a pic so you can see the bracket on top backside.

I have one of these and seven of the type shown in the picture (using the knob as the air volume adjustment rather than the pull chain). If you are interested please contact me at 444tre444its@444gma444il.444com444.

If your still looking for your exact style ge heat register , I just picked up 12 of them. My email is punger3183@comcast. Net

If your still looking for your exact style ge heat register , I just picked up 12 of them. My email is punger3183@comcast. Net

If your still looking for your exact style ge heat register , I just picked up 12 of them. My email is punger3183@comcast. Net

Looking for some of these registers with the knob - any still available?

777runkles777pearson@777gmail777.com

Hello. I'm looking for two of these for our '50s Cape Cod and any help in greatly appreciated.

Thanks,

Jeff

***jcook07***@rochester****.rr.com***