The pump is leaking at about a gallon per day. How do I go about finding the cause and
cure? Also, what does losing this water mean
in terms of maintainence in the short run?
I'm told the boiler could use replacing..how
big a job is that and are there there better
meathods or systems to consiser? And.. the hot water tank is about to go, is there a combo solution?
COMMUNITY FORUM
The pump has a bad seal. Replace the pump or the bearing assembly (depending on which pump you have).
There is a setup that will heat the water for heating your house and then heat your domestic water.
There is a setup that will heat the water for heating your house and then heat your domestic water.
The pump has a bad seal. Replace the pump or the bearing assembly (depending on which pump you have).
There is a setup that will heat the water for heating your house and then heat your domestic water.
There is a setup that will heat the water for heating your house and then heat your domestic water.
G&G series 100, ( red in color ) has a bearing assembly that can be replaced. I do not recomend that you change it yourself. It's a-little difficult to explain.
I've seen a couple of tankless HWHs do the job. Check out:
http://www.cetsolar.com/plumbingt-k1.htm
http://www.cetsolar.com/plumbingt-k1.htm
I hope that helps
