COMMUNITY FORUM

wheelie76

01:25PM | 12/16/02
Member Since: 12/15/02
3 lifetime posts
Bvhvac
need information on wiring of aprilaire 600 to a 1985 Bryant forced air furnace. Have
everything installed properly. Am now wiring
to furnace. Terminals on furnace C W R G Y.
Which do i use- and do i use supplied 24vac
transformer?? There is also a hum port on circuit board- any help is appreciated>

wheelie76

04:15AM | 12/17/02
Member Since: 12/15/02
3 lifetime posts
thanks much....getting closer.will the humidifier work when blower is on if wired this way ? i guess i'm confused...with what you mean by circle wires together?the aprilaire instructions have me connecting the soleniod direct to the a/a on the control.i am using outdoor sensor and this is a gas furnace.do i have to use 110v source or can i go to c w r g y or hum on furnace...thanks for your response

wheelie76

09:01AM | 12/17/02
Member Since: 12/15/02
3 lifetime posts
Hey Thanks HKestenholz
U are the man Gonna try a couple of things and get back to u with results. Thanks again!!!

JoeB27

08:26PM | 12/17/02
Member Since: 12/15/02
4 lifetime posts
You are the master of Aprilaire humidifer electrical hookup. I have been looking at the schematic panel on my 2002 Heil furnace and my Aprilaire 700 diagram and racking my brain since I bought the thing! Thanks


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

captcha
type the code from the image

Anonymous

Post_new_button or Login_button
Register

Follow Us

horizontal divider
facebook
 
webapp2