My garage is approximately 21x21 and it has a 11x12 ft. office that was put in by previous owner. I would like to make another large room besides the office. How do I begin?
COMMUNITY FORUM
- Forum >
- Tools & Workshop >
- converting garage to extra room
Could you be more specific?
You could just lay out the area on paper and figure where it would be best located.
Then start framing your floor plan starting with a bottom plate, if on concrete you need to use a pressure treated bottom plate, frame the walls with the door included (2'8"x6'8" door is most common and requires an R.O. of 2'10"x6'9-10" depending on flooring)and cap with a double top plate.
I would need more detail on what you require.
Good luck
You could just lay out the area on paper and figure where it would be best located.
Then start framing your floor plan starting with a bottom plate, if on concrete you need to use a pressure treated bottom plate, frame the walls with the door included (2'8"x6'8" door is most common and requires an R.O. of 2'10"x6'9-10" depending on flooring)and cap with a double top plate.
I would need more detail on what you require.
Good luck
