COMMUNITY FORUM

gstar555

03:13PM | 10/31/10
Member Since: 10/30/10
2 lifetime posts
Bvhvac
My furnace is 8 years old and was pit in by the previous owners. Last year it seemed to work fine. It's part of a central system and AC worked fine all summer. When i turned on the furnace this year it would heat about 2 degrees (so if it was 60 on the house and I wanted it at 66, at about 62) and then the furnace burner and fan shut off. The thermostat blinks HEAT and FAN, which it does when these were on. After some time, it would come on again. Eventually it will heat to the set temp.

I had a tech here to service and clean it. I also cleaned the air intake vent. He thought it needed more air (there is only one intake vent) because of the high pressure (this was before i cleaned it... it was a mess). Again, last year we did not have this issue. So it was suggested we need a new intake vent. He also thought the furnace was hitting the hi too quickly and that piece may be worn out. The other thought was to clean the coils, although the pressure on either side was fine.

So I'm wondering if the system worked 7 years, why would it need more air now? What else should I check or think about? Could it just be the limit switch that is tired? Any other reason this would happen?

Thanks for any help.

LarryG

02:24AM | 11/01/10
Member Since: 07/22/04
511 lifetime posts
was that changed?

the tech should be able to determine if it's cycleing off on high limit. if not i would suspect the flame proving device.

gstar555

07:15AM | 11/01/10
Member Since: 10/30/10
2 lifetime posts
The filter was changed when the tech looked at it (it was changed recently before that also). It is cycling off on high-limit, but his only thought was that it wasn't getting enough air (I've since cleaned out all the intake vents). Since it's running worse now, I'm wondering if some mech equip inside is failing, or if it's a gas issue? The gas lines on the property were replaced recently because they were leaking.

LarryG

07:29AM | 11/01/10
Member Since: 07/22/04
511 lifetime posts
What was the mannometer reading on the gas valve tap?

Another thing could be a blocked evaporator coil or blocked or closed heating vents.

LarryG

08:25AM | 11/01/10
Member Since: 07/22/04
511 lifetime posts
you said a tech was out but he was unable to resolve the issue.

is the fan belt(if it has one)wore out)

blower wheel cruded up?

cutting out on high limit but did he take an actual temp reading to see what point it was opening?
Click_to_reply_button
Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

captcha
type the code from the image

Anonymous

Post_new_button or Login_button
Register

Deep blue grays like the shade shown in this example "have a nautical, serene feeling," says Amy Hendel, designer for Hend... Built on a rocky island in the Drina River, near the town of Bajina Basta, Serbia, this wooden house was cobbled together ... Large steel-framed windows flood the interior of this remodeled Michigan barn with daylight. The owners hired Northworks A... Edging formed with upside-down wine bottles is a refreshing change. Cleverly and artistically involving recycled materials... A Washington State couple called on BC&J Architects to transform their 400-square-foot boathouse into a hub for family bea... Similar to the elevated utensil concept, hanging your pots and pans from a ceiling-mounted rack keeps them nearby and easy... Few projects are more fun than upcycling a vintage piece in a surprising way. Outfitted with a sink and a delicately tiled... The thyme growing between these stepping stones adds a heady fragrance to strolls along this lush, low-maintenance garden ... Decoupage is an easy way to add any paper design to your switch plate, whether it is wallpaper, scrapbook paper, book page... Twine lanterns add pops of crafty—but sophisticated—flair to any outdoor setting. Wrap glue-soaked twine around a balloon ... When securely fastened to a tree or the ceiling of a porch, a pallet and some cushioning make the ideal place to lounge. V... Reluctant to throw away any of those unidentified keys in your junk drawer? Hang them from a few chains attached to a simp... A stripped-down model, sans screened porch, starts out at $79,000. Add the porch, a heated floor for the bath, and all the... Salvaged boards in varying widths and colors make up the dramatic accent wall in this attic space. The high-gloss white of... This garden shed has been decked out to the nines. Designer Orla Kiely created the intimate home for a flower trade show, ...
Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon
 
webapp1